The Great Bottle Opener Giveaway

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Is my keg stainless steel or aluminum?

Reply
 
LinkBack Thread Tools
Old 11-18-2008, 05:06 PM   #1
EvilTOJ
Feedback Score: 0 reviews
 
EvilTOJ's Avatar
Recipes 
 
Join Date: Dec 2005
Location: Portland, OR, Oregon
Posts: 6,466
Liked 35 Times on 29 Posts
Likes Given: 3

Default Is my keg stainless steel or aluminum?

Have you ever wondered if your 15 gallon keg is stainless steel or aluminum (or aluminiumimum if you live across the pond) Well wonder no more! I have in my posession a stainless steel keg, and an aluminum keg for comparison. Behold!



The stainless steel one is on the left, the aluminum one is on the right. Notice the duller, more uniform color on the right hand one, and the left on has more varying shiny spots.



A closer look at the two kegs. You can see the color variation a lot more here. The one on the right is noticably lighter, but I don't have a scale to weigh them with. The fittings on top are identical. So there you have it!

__________________

There is a very fine line between "hobby" and "mental illness."

EvilTOJ is offline
 
Reply With Quote Quick reply to this message
Old 11-18-2008, 05:13 PM   #2
MrNate
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Bridgewater, NJ
Posts: 822
Liked 15 Times on 8 Posts

Default

Can I get a Sticky sticky?

Do a scratch test, too. And demonstrate the supposed "magnet test." Then you'll be my hero.

__________________
MrNate is offline
 
Reply With Quote Quick reply to this message
Old 11-18-2008, 05:20 PM   #3
EvilTOJ
Feedback Score: 0 reviews
 
EvilTOJ's Avatar
Recipes 
 
Join Date: Dec 2005
Location: Portland, OR, Oregon
Posts: 6,466
Liked 35 Times on 29 Posts
Likes Given: 3

Default

d'oh! I forgot all about those. I shall return...


OK back. Well, the pictures for the scratch test came out blurry, but they were identical anyways. I used a nail file and tried to gouge as deep a furrow as I could, but it barely scratched the surface of both. I was going to use a rasp on them as well, but the SS keg is so scratched up you couldn't tell where the rasping on it was anyways.

Here's the magnet tests. I used plain ol refrigerator magnets.

The aluminum test. For some reason it failed to adhere to it.



And now the stainless steel test.



Also didn't stick! It fell right off, just like the aluminum test.

So there's those! I suppose another way to tell if it's SS or AL is to boil hot water in it, and the dark oxide will form on an AL keg, but not in the SS keg.

__________________

There is a very fine line between "hobby" and "mental illness."


Last edited by EvilTOJ; 11-18-2008 at 06:24 PM.
EvilTOJ is offline
 
Reply With Quote Quick reply to this message
Old 11-18-2008, 05:24 PM   #4
Brewing Clamper
Feedback Score: 0 reviews
 
Brewing Clamper's Avatar
Recipes 
 
Join Date: Apr 2006
Location: Union City, CA
Posts: 2,862
Liked 16 Times on 15 Posts
Likes Given: 2

Default

You acquired those ethically I trust... I jest, I jest! What's in store for those guys anyway?

__________________

--Omar

4 Ohms Aleworks & Lagers | Twitter | Facebook | Blog |

Brewing Clamper is offline
 
Reply With Quote Quick reply to this message
Old 11-18-2008, 05:47 PM   #5
BrewBeemer
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2006
Location: no city an island, inside an atoll
Posts: 3,503
Liked 20 Times on 20 Posts
Likes Given: 7

Default

Yup my neighbor pulled out a stainless Firestone keg like you have on the left. It has been over grown in a ivy fence the last 8 years just discovered. It's the odd duck as all my kegs are AB, this odd Firestone will be my plasma practice cutting, sawing, milling apart, welding and practice on keg in the future. It just isn't right to have a single tier with two A Bush kegs then one Firestone in the lineup, just flat looks out of place.

__________________

Bier Jagdwaffe... Bier 30 zeit.....~~=o&o>..........


Last edited by BrewBeemer; 11-18-2008 at 08:34 PM.
BrewBeemer is offline
 
Reply With Quote Quick reply to this message
Old 11-18-2008, 05:59 PM   #6
the_bird
10th-Level Beer Nerd
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
the_bird's Avatar
Recipes 
 
Join Date: May 2006
Location: Adams, MA
Posts: 20,441
Liked 352 Times on 290 Posts
Likes Given: 93

Default

Quote:
Originally Posted by EvilTOJ View Post
The one on the right is noticably lighter, but I don't have a scale to weigh them with.
Don't you have a bathroom scale? Did Plumpy break it?
__________________
Come join Yankee Ingenuity!

"I'm kind of toasted. But I looked at my watch and it's only 6:30 so I can't stop drinking yet." - Yooper's Bob
"Brown eye finally recovered after the abuse it endured in Ptown last weekend, but it took almost a full week." - Paulie
"no, he just doesn't speak 'stupid'. i, however, am fluent...." - motobrewer
"... I'll go both ways." - Melana

That'll do, Pigley. That'll do.
the_bird is offline
 
Reply With Quote Quick reply to this message
Old 11-18-2008, 06:26 PM   #7
EvilTOJ
Feedback Score: 0 reviews
 
EvilTOJ's Avatar
Recipes 
 
Join Date: Dec 2005
Location: Portland, OR, Oregon
Posts: 6,466
Liked 35 Times on 29 Posts
Likes Given: 3

Default

No, I lost that in the divorce. Any other time I weigh myself is at the gym, so I've never had the need to buy one.

I'm fat. Anyways, I edited the post above to include my scratch test and magnetic testing. I'm not sure what I'm going to do with them exactly. I have three SS kegs, and this AL one. I'm thinking of making a fermenter out of one of them, and a 3 tier out of the rest some day.

__________________

There is a very fine line between "hobby" and "mental illness."

EvilTOJ is offline
 
Reply With Quote Quick reply to this message
Old 11-18-2008, 07:32 PM   #8
giligson
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2008
Location: Vancouver Area - Canada
Posts: 755
Liked 4 Times on 4 Posts
Likes Given: 1

Default

so now we know that magnets only stick to ferrous metals like iron and cobalt and not to SS or Al. The easy test is weight.

__________________
giligson is offline
 
Reply With Quote Quick reply to this message
Old 11-18-2008, 07:40 PM   #9
Lil' Sparky
Cowboys EAC
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Lil' Sparky's Avatar
Recipes 
 
Join Date: Feb 2006
Location: Honolulu, HI
Posts: 4,013
Liked 47 Times on 32 Posts

Default

I think you've got 2 SS kegs, bro. Aluminum kegs are very rare because they're just not sturdy enough to hold up to the abuse they take. I think the ones that are out there are typically imports.

The file/gouge test would've had very different results between the two, as aluminum is much softer than SS. You should've been able to easily file off or dig a big gouge in the aluminum.

__________________
Quote:
Originally Posted by duffman2 View Post
I dub this beer the Double Slutty Triple Nutty Bodacious Booty Brunette!
Lil' Sparky is offline
 
Reply With Quote Quick reply to this message
Old 11-18-2008, 08:42 PM   #10
The Pol
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2007
Posts: 11,616
Liked 51 Times on 48 Posts

Default

Touch an angle grinder to it... there should be a pretty big difference.

__________________
The Pol is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stainless steel vs. Aluminum axr Equipment/Sanitation 5 04-21-2009 09:58 PM
Stainless Steel v. Aluminum DirtyJersey Beginners Beer Brewing Forum 18 03-23-2009 08:37 PM
Aluminum or Stainless Steel Kettles? rbridges01 Equipment/Sanitation 21 02-29-2008 04:36 PM
Aluminum instead of Stainless Steel thebbqguy General Techniques 4 10-07-2007 03:06 PM
Aluminum or stainless steel dudester Equipment/Sanitation 14 04-03-2007 11:42 AM