Happy HolidaySs Giveaway - Winners Re-Re-Re-Re-Drawn - 24 hours to Claim!

Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > MoreBeer oxygenation system cleaning question.
Reply
 
LinkBack Thread Tools
Old 10-25-2011, 02:25 AM   #1
Beerens
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: Troy, Michigan
Posts: 110
Liked 2 Times on 2 Posts
Likes Given: 6

Default MoreBeer oxygenation system cleaning question.

I just bought a Morebeer oxygenation set up and used it on my last porter. After using it I wanted to take it apart to clean it. There is a black hose attached to an air filter. I can not get the black hose off of the filter to clean and sanitize. I am about to cut it off. I have heard that filters are not necessary when using o2. Anyone out there have the same problem or any experience with not using a filter with pure o2?

__________________
Beerens is offline
 
Reply With Quote Quick reply to this message
Old 10-25-2011, 02:41 AM   #2
day_trippr
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Stow, MA
Posts: 11,190
Liked 1380 Times on 1115 Posts

Default

I've never used a filter with pure O2 and I've been using pure O2 for years...

Cheers!

__________________
day_trippr is online now
 
Reply With Quote Quick reply to this message
Old 10-25-2011, 02:52 AM   #3
dutchoven
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
dutchoven's Avatar
Recipes 
 
Join Date: Mar 2011
Location: SF Bay Area, California
Posts: 635
Liked 8 Times on 8 Posts
Likes Given: 4

Default

I have the same setup and was able to get the filter off (not sure what that black tubing is, but you have to pull HARD). I keep the tubing connected to the stone, boil to sanitize, then attach to the filter to use. You could cut the filter off, then stretch the tubing to easily reattach.

__________________
dutchoven is offline
 
Reply With Quote Quick reply to this message
Old 10-25-2011, 10:04 PM   #4
Bones1948
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Fredericksburg, TX
Posts: 50
Default Everclear

For my sausage/meat processing equipment and smaller brewing equipment I use Everclear, which is 190 proof (95% grain) alcohol. Any mirco-organism it touches instantly dies and if you absorb some through the skin so what? It dries quickly from all surfaces leaving no residue. For your tubing it would be quick and easy. For the filter (which is not needed) simply run some through it. For a stone bubbler run it through the dishwasher to get the wort off it then immerse in Everclear. Pour some into a Coke, consume, and you'll feel much better about everything.
s

__________________
Bones1948 is offline
 
Reply With Quote Quick reply to this message
Old 10-26-2011, 03:48 AM   #5
turkeyjerky214
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: St. Louis, MO
Posts: 398
Liked 6 Times on 5 Posts
Likes Given: 3

Default

I don't use a filter with my pure oxygen system from Williams Brewing. Just hook the tube to the regulator and the rod, open the valve for 30 seconds, and I'm good to go. To clean it, I just put the stone in boiling water for a few minutes.

__________________

-Brian

Tap 1: Flanders Brown Tap 2: Pumpkin Ale Tap 3: Rye IPA Tap 4: Wee Heavy Tap 5: Apfelwein

Fermenting: Amber Ale
Kegged: Barrel-Aged Barleywine, Barleywine, RIS,

Lagering: Märzen

turkeyjerky214 is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Oxygenation System cee3 Equipment/Sanitation 8 06-02-2014 08:29 PM
Oxygenation system? HHP Equipment/Sanitation 2 07-26-2011 05:48 PM
oxygenation system questions kgfitz Equipment/Sanitation 3 07-25-2011 03:33 AM
3B oxygenation system thebull Equipment/Sanitation 1 08-18-2007 12:06 AM
Using the 3B oxygenation system thebull Equipment/Sanitation 7 08-12-2007 02:16 PM



Newest Threads

LATEST SPONSOR DEALS