New Giveaway - Wort Monster Conical Fermenter!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Mash tun in the land of bad coolers




Reply
 
LinkBack Thread Tools Display Modes
Old 05-09-2010, 03:41 PM   #1
gyllstromk
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Posts: 85
Liked 1 Times on 1 Posts

Default Mash tun in the land of bad coolers

I'm in a different country for some time, trying to keep my all-grain brewing active. In the US, I had a converted cooler with a stainless steal braid and copper tubing where the water spigot was. I brought my braid because it was a pain to make, but I have found that none of the coolers here are equipped with spigots. I was thinking of using a cooler, nonetheless, and had an idea about how to proceed:

What I'd like to do is attach the steel braid as a filter to the end of some vinyl tubing, keep it at the bottom of the grain, then run the tubing out of the cooler during the run off period. I will have to suck on the tube to get the suction going, but to my knowledge there is nothing really wrong about this approach except for the fact that it isn't convenient and therefore probably a bad long-term solution. Anyone have experience with such an approach?



__________________
gyllstromk is offline
 
Reply With Quote Quick reply to this message
Old 05-09-2010, 03:54 PM   #2
Pappers_
Moderator
HBT_MODERATOR.png
Feedback Score: 0 reviews
 
Pappers_'s Avatar
Recipes 
 
Join Date: Jan 2009
Location: Chicago
Posts: 11,206
Liked 803 Times on 583 Posts
Likes Given: 1818

Default

I'm not quite envisioning your idea - create a siphon that would pull the liquid through the grain?

Another idea would be to use a brew mesh bag to hold your grains in the cooler. When mash is down, lift out the bag. You would probably need to rig up something with a collander to let the water drip out of the grains without breakng your arms



Pappers_ is offline
 
Reply With Quote Quick reply to this message
Old 05-09-2010, 03:57 PM   #3
gyllstromk
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Posts: 85
Liked 1 Times on 1 Posts

Default

One end of the tubing has the mesh attached, and sits at the bottom of the tun. Rather than run off through the spigot (as in the usual MT design), I pull the liquid at the bottom of the tun out through the suction.

__________________
gyllstromk is offline
 
Reply With Quote Quick reply to this message
Old 05-09-2010, 03:59 PM   #4
hoppymonkey
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: north atlanta
Posts: 1,021
Liked 11 Times on 9 Posts
Likes Given: 1

Default

They don't haven't be equipped with a spigot, Just a half inch drill bit(wood bit) and stick either a 1/2 inch threaded copper short nipple or 1/2" electrical grade plastic thru it. Took me 15 minutes to make mine this way.

__________________
hoppymonkey is offline
 
Reply With Quote Quick reply to this message
Old 05-09-2010, 04:03 PM   #5
gyllstromk
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Posts: 85
Liked 1 Times on 1 Posts

Default

Quote:
Originally Posted by hoppymonkey View Post
They don't haven't be equipped with a spigot, Just a half inch drill bit(wood bit) and stick either a 1/2 inch threaded copper short nipple or 1/2" electrical grade plastic thru it. Took me 15 minutes to make mine this way.
I can't drill either. I'm really trying to see if it's viable to do the suction with the tun.
__________________
gyllstromk is offline
 
Reply With Quote Quick reply to this message
Old 05-09-2010, 04:08 PM   #6
philrose
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2008
Location: Seattle, WA
Posts: 1,423
Liked 12 Times on 9 Posts
Likes Given: 21

Default

Can't drill?? Might want to keep that to yourself on this forum

__________________
In process-
Kegged-
Last bit of Sparkling Mead
Planning- Witbier

@philthebrewer
philrose is offline
 
Reply With Quote Quick reply to this message
Old 05-09-2010, 06:37 PM   #7
wilserbrewer
Vendor
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 7 reviews
 
wilserbrewer's Avatar
Recipes 
 
Join Date: May 2007
Location: Jersey Shore, Jersey
Posts: 6,202
Liked 331 Times on 284 Posts
Likes Given: 7

Default

There is no reason that you cannot syphon out of the mash tun. It might be a bit of a hassle...but it can be done.

Her ya go...bottom of page. This shows a manifold, but a braid will work if you can keep it at the bottom of the tun/cooler.

http://www.howtobrew.com/appendices/appendixD.html



__________________
wilserbrewer
BIAB Bags, Hop Bags and Ratchet Pulleys for sale

Expert tailor and supplier of custom sized, top quality BIAB bags, hop bags and ratchet pulleys at reasonable pricing

http://biabbags.webs.com/


CORONA MILL BUCKET SYSTEM V. 2.0

Last edited by wilserbrewer; 05-09-2010 at 06:43 PM.
wilserbrewer is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mash/Lauter TUN 5-Gallon Igloo Coolers falmike DIY Projects 3 11-07-2009 10:48 PM
Mash Equations for 10 gal Rubbermaid Coolers eschatz Equipment/Sanitation 20 08-02-2009 08:51 PM
Coolers for Mash Tun? WillWyn Equipment/Sanitation 8 11-17-2008 07:44 PM
2 5gal coolers? mash tun? NikolausXX All Grain & Partial Mash Brewing 11 09-20-2008 01:43 AM
Rubbermaid coolers same as GOTT coolers? drinker Equipment/Sanitation 11 11-28-2006 08:35 PM