*Ss Brewing Technologies Giveaway - Enter Now!*

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > March Pump Set Up
Reply
 
LinkBack Thread Tools
Old 05-27-2009, 08:26 PM   #1
Gammon N Beer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2007
Location: WI
Posts: 719
Liked 9 Times on 9 Posts
Likes Given: 40

Default March Pump Set Up

Hi
My March pump 809 arrived and I now want to set it up. I need a bit of help doing so as I understand there are issues with priming.

First of all, I want to include a ball valve in the operation so I can slow the flow down. Do I put the valve on the, "In" or the, "Out" side of the pump?

Secondly, I will screw it to the leg of my current wooden brew stand and use the stand to gravity feed my Igloo cooler mash tun. The boil kettle and the HLT will both have their own propane Turkey fryer burners set on the floor near the brew stand. My first application is to simply move sparge water to the mash tun using the pump. From there, I will recirculate the wort using the pump, then gravity feed to the boiler until I am more comfortable with the pump.

I know I must have the pump below the bottom level of the HLT. I have heard people say that the, "In" port should be arranged so it points directly to the floor.

Does this sound correct to you folks? TY

__________________
Gammon N Beer is offline
 
Reply With Quote Quick reply to this message
Old 05-27-2009, 08:28 PM   #2
ChrisKennedy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2007
Location: Pittsburg, California
Posts: 385
Liked 11 Times on 10 Posts

Default

Always control speed of flow on pumps by throttling on the output, never the input.

__________________
ChrisKennedy is offline
 
Reply With Quote Quick reply to this message
Old 05-27-2009, 08:32 PM   #3
The Pol
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2007
Posts: 11,616
Liked 54 Times on 51 Posts

Default

Here is mine, works great. Have it below the source, but not any lower than needed, the more head it has, the poorer the performance.

Also, recommend using 1/2" plumbing... dont restric the flow, again, poor performance.

Always place the valve on the OUT let.

Orientation of the pump... well, mine is not conventional, but I can prime it in 10 seconds... so?

__________________
The Pol is offline
 
Reply With Quote Quick reply to this message
Old 05-27-2009, 10:01 PM   #4
Catt22
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Posts: 4,998
Liked 57 Times on 55 Posts
Likes Given: 51

Default

March Pump Installation Instruciotns:

http://www.marchpump.com/documents/Installation.pdf

__________________
Catt22 is offline
 
Reply With Quote Quick reply to this message
Old 05-28-2009, 08:03 PM   #5
Gammon N Beer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2007
Location: WI
Posts: 719
Liked 9 Times on 9 Posts
Likes Given: 40

Default

TY everybody....it works!

__________________
Gammon N Beer is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Why won't my March pump march? wildwest450 Equipment/Sanitation 12 10-09-2011 04:01 PM
How high can a March Pump--pump? jlosbor Equipment/Sanitation 18 07-02-2010 03:13 PM
March Pump - Before or after CFC? zombeer Equipment/Sanitation 4 04-26-2009 01:23 PM
March pump 809-br Dr. Fedwell Equipment/Sanitation 8 03-09-2008 08:25 PM
March Pump ? Kayos Equipment/Sanitation 4 02-28-2008 08:58 PM