Newest Threads

ryno1ryno · 12-12-2012, 02:28 AM

Is there anything like this that is cheaper? Comparable quality?

http://www.midwestsupplies.com/floor-standing-burner.html

Any other ideas?

Thanks.

Swanie · 12-12-2012, 02:33 AM

Quote:

Originally Posted by ryno1ryno

Is there anything like this that is cheaper? Comparable quality?

http://www.midwestsupplies.com/floor-standing-burner.html

Any other ideas?

Thanks.

I use a turkey fryer from homedepot, it came with a 30qt pot for $70. Works great for me.

EDIT: I did upgrade to a 10gal pot for my boil, and use the pot it came with for sparge water.

Chrisl77 · 12-12-2012, 02:36 AM

Used this one for a while before building my stand. Had no problems with a 10 gallon pot.

ryno1ryno · 12-12-2012, 02:37 AM

Cool thanks!

I also found this:

http://www.amazon.com/King-Kooker-1266B-30-Quart-Aluminum/dp/B0047O3P8Y/ref=sr_1_2?ie=UTF8&qid=1355283034&sr=8-2&keywords=king+kooker

Pot and burner for $94

And then this:

http://www.amazon.com/Bayou-Classic-SP10-High-Pressure-Outdoor/dp/B000291GBQ/ref=sr_1_12?ie=UTF8&qid=1355283034&sr=8-12&keywords=king+kooker

$43.99

Question... does aluminum make a difference vs stainless?

Swanie · 12-12-2012, 02:40 AM

They both have pros and cons. Do a search in the forum. If yiu have a cash and carry in your area i just picked up my 10 GALLON aluminum pot there for $39 out the door.

ryno1ryno · 12-12-2012, 02:42 AM

Quote:

Originally Posted by Chrisl77

Used this one for a while before building my stand. Had no problems with a 10 gallon pot.

LMAO... the very first comment for this "Turkey Fryer" says this:

Quote:

For the Homebrewers

06/28/2012

This setup will get it done. You'll be able to boil 7+ gallons of wort with no issue. Be aware, however, that this is very lightweight aluminium. It is possible, but very sketchy, to mount a ball valve spigot and kettle screen but you will need reinforcement washers on each side. Even when empty, dropping this thing on a sharp surface (like the edge of the propane burner) would be enough to dent or puncture it. I use this in my primary all-grain setup, so it can be done.