New Giveaway - Wort Monster Conical Fermeneter!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Keg Repair




Reply
 
LinkBack Thread Tools Display Modes
Old 02-02-2009, 04:43 PM   #1
IrregularPulse
Hobby Collector
Feedback Score: 0 reviews
 
IrregularPulse's Avatar
Recipes 
 
Join Date: Nov 2007
Posts: 41,123
Liked 2729 Times on 2680 Posts
Likes Given: 99

Default Keg Repair

My boil keggle is a little bent up around the skirt which makes it difficult to sturdy it on my burner. Any tips on what methods/tools should be used to straighten this skirt out short of beating it with a hammer?



__________________
Tap Room Hobo

I should have stuck to four fingers in Vegas. :o - marubozo
IrregularPulse is offline
 
Reply With Quote Quick reply to this message
Old 02-02-2009, 06:00 PM   #2
Anthony_Lopez
Feedback Score: 0 reviews
 
Anthony_Lopez's Avatar
Recipes 
 
Join Date: Mar 2008
Location: Groton, MA
Posts: 1,693
Liked 15 Times on 7 Posts
Likes Given: 2

Default

I'd use a hammer...



__________________

I'd rather have a bottle in front of me, than a frontal lobotomy.
--Tom Waits

You can't be a real country unless you have a beer and an airline - it helps if you have some kind of a football team, or some nuclear weapons, but at the very least you need a beer.
--Frank Zappa

My Cheap and Easy Stirplate

Anthony_Lopez is offline
 
Reply With Quote Quick reply to this message
Old 02-02-2009, 07:40 PM   #3
Dustin_J
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2006
Location: St. Louis, MO
Posts: 106
Default

I too am interested in other ideas. I have a 3 lb hand held sledge hammer that I tried to use to straighten out the skirts on my kegs and I really had to beat the crap out of them to get them to move at all, and they still aren't that great. That SS is tough stuff.

__________________

"People who choose Bud and Coors over a microbrew are the same people that put catsup on their steak." - Some guy on the internet

Dustin_J is offline
 
Reply With Quote Quick reply to this message
Old 02-02-2009, 07:51 PM   #4
olllllo
[]-O-[]
Feedback Score: 0 reviews
 
olllllo's Avatar
Recipes 
 
Join Date: Apr 2006
Location: Phoenix, Arizona
Posts: 13,518
Liked 119 Times on 101 Posts
Likes Given: 13

Default

Bottle jack?

Keg Embendener. Invent it.

__________________
Rabbit And Coyote Schwag
Rob - Phoenix Ambassador to Milwaukee
Where did your avatar go?
Ginger Beer for Moscow Mules Bacon Vodka
Twitter
olllllo is offline
 
Reply With Quote Quick reply to this message
Old 02-02-2009, 08:06 PM   #5
Bobby_M
Vendor and Brewer
Vendor Ads 
Feedback Score: 1 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Piscataway, NJ
Posts: 21,728
Liked 853 Times on 572 Posts
Likes Given: 26

Default

If the skirt is bent inward, You could use a very large pipe wrench on it (with some rags to keep from marring) but you'll need someone to sit on the keg to hold it down.

__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!
Bobby_M is online now
 
Reply With Quote Quick reply to this message
Old 02-02-2009, 09:36 PM   #6
springer
Feedback Score: 0 reviews
 
springer's Avatar
Recipes 
 
Join Date: Feb 2008
Location: Wappingers falls NY
Posts: 4,990
Liked 19 Times on 18 Posts

Default

Just like in body and metal work if you don't back up your work it just springs back. On Heavy gauge steel we used to use two 5 pound sledges One to beat the metal and the other to concentrate the force . Take a small sledge and put it on the crease where the metal is bent and then hit the lip of the base with the other it should move much easier than just using one hammer you may need two people. Or if you can lay it on something and beat it . We had a 3 ft piece of railway track for that.

If you now someone with a hydraulic porta power used in body work it is real easy just pump a few times and hit the crease it will move like butter.

__________________

'The taxpayer: That's someone who works for the federal government but doesn't have to take the civil service examination.'- Ronald Reagan

springer is offline
 
Reply With Quote Quick reply to this message
Old 02-02-2009, 11:32 PM   #7
Monster Mash
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2006
Location: Castaic, CA
Posts: 1,317
Liked 82 Times on 65 Posts
Likes Given: 12

Default

If it is bent inwards you could set a jack inside with some blocks and jack it straight. You would need two heavy pieces of steel with a radius the same as the keg for the top and bottom of the jack so you don't deform it even worse.

You might get by with some 4X4 wood blocks with the radius cut in them also.

__________________
My 1BBL Brewery Pics
Monster Mash is offline
 
Reply With Quote Quick reply to this message
Old 02-03-2009, 01:26 PM   #8
HenryHill
Feedback Score: 0 reviews
 
HenryHill's Avatar
Recipes 
 
Join Date: Mar 2007
Location: Perry, MI
Posts: 3,299
Liked 11 Times on 11 Posts
Likes Given: 6

Default

Maybe just squeeze it in a vise with strips of soft metal in between keg and vise jaw to prevent marking up the keg surface. This will let it sit level again.

The best answer is to only use a good keg to begin with, if aesthetics are important. Pawn the old one and stat over. Keep your plumbing for the new one.



__________________
Quote:
Originally Posted by orfy
Never mock another man's brewery.
Quote:
Originally Posted by IrregularPulse View Post
This is HBT of course. Normal Thread that goes every direction but the one intended. This forum should be scientific proof the beer causes ADD
HenryHill is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ever try this repair? Holmesbrewer Recipes/Ingredients 3 04-15-2009 03:15 PM
fridge repair? blackwaterbrewer General Beer Discussion 8 03-29-2009 02:02 PM
keg repair balto charlie Equipment/Sanitation 6 10-06-2008 04:07 PM
Cider repair Wort*hog Cider Forum 0 09-30-2006 04:53 PM