Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Keg into Brewpot Help
Reply
 
LinkBack Thread Tools
Old 01-06-2005, 02:15 PM   #1
pilkinga
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2004
Posts: 44
Liked 1 Times on 1 Posts

Default Keg into Brewpot Help

I have been thinking of upgrading soon to all grain and I know I will need to start boiling larger batches to make it worth my time. My local brewshop sells keg-kettles for $125 and that is a little more than I have at the time. What I do have is an old keg in my backyard that I could possibly convert myself.

1) Has anyone ever cut the top out of a keg themselves and how difficult was it?

2) Would it be more beneficial to take it to a machine shop and have them cut out the top for me?

3) If I end up going the machine shop route, should I have them do any other modifications like welding in some stainless steel fittings for me, and if so what fittings would I need and for what purpose?

Thanks for all your responses in advance and I look forward to upgrading.

__________________
pilkinga is offline
 
Reply With Quote Quick reply to this message
Old 01-08-2005, 02:35 AM   #2
beernut
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2004
Location: The good ole midwest!
Posts: 3
Default

Stainless steel is tough to cut! If you haven't tried to cut any before be ready for some work. If you have lots of patience try to drill a bunch of holes in a circular pattern and connect with a saw. Run a 1/4" high speed drill at about 600 rpm or so or else you'll burn it up in a few holes. A 12" finished hole needs about 130 holes. Makes sawing a bunch easier and if you get a double cut half round file it will smooth out the cirlce pretty quick (still a lot of elbow grease required). I can post a procedure if you're interested. I'll bet a weld shop with a plasma cutter may be a better way to go than a machine shop. Be sure they fill the keg with water before cutting to keep the slag from sticking to the innards of the keg. Trading some of your homebrew might get you a better price at the weld shop. Welding is thirsty work! Good luck!

__________________
beernut is offline
 
Reply With Quote Quick reply to this message
Old 01-08-2005, 12:13 PM   #3
smorris
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2004
Location: West coast of FL
Posts: 162
Liked 1 Times on 1 Posts

Default

Find a friend with a plasma cutter or a weld shop. If you need fittings, that would be the time to do it, although some do not like welded fittings. If it is going to be a boil pot then the welds should not be an issue.

__________________
smorris is offline
 
Reply With Quote Quick reply to this message
Old 01-11-2005, 08:52 PM   #4
Janx
Feedback Score: 0 reviews
 
Janx's Avatar
Recipes 
 
Join Date: Dec 2004
Location: San Francisco Bay Area
Posts: 1,688
Liked 13 Times on 9 Posts

Default

I'd go to a machine shop, as you'll get nicer results, and cutting stainless really sucks.

And *definitely* get them to weld in a spigot/valve at the bottom, and a threaded nipple for a thermometer a little ways up. With 10 or more gallons in your kettle, you can't tip and pour it, so the spigot is much safer. And the thermometer helps when it is getting closer to boil. My beers take 30 minutes at least to reach boil on a 250,000 BTU burner. It's nice to know when they're getting close so you can watch for boilovers.

Janx

__________________
Janx is offline
 
Reply With Quote Quick reply to this message
Old 01-19-2005, 02:17 PM   #5
Witbier
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2005
Location: Massachusetts
Posts: 29
Default

I've cut open several with a saws-all. It's not that bad once you get the hang of it. There are a few web sites out there that will take you step by step through the process if you're up to it.

Try this one: http://www.brew-beer.com/kegs.htm

It's definitely easier with a second person there to help you hold the keg down. For fittings I used the Schmidling easy masher. Works perfectly.

__________________
Witbier is offline
 
Reply With Quote Quick reply to this message
Old 01-27-2005, 04:24 AM   #6
Uncle Fat
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2005
Location: Beervana
Posts: 135
Liked 1 Times on 1 Posts

Default

I cut mine with a dremmel tool using heavy-duty cutoff wheels. It wasn't tough at all, but I went through about a dozen wheels. If I had known better, I'd have used an angle grinder with a heavy duty cutoff wheel, it would have been much easier, and the wheel wouldn't even have noticed. I went weldless with the valve / down-tube, and got the hi-temp o-rings online for a few cents.... All in all, the most expensive thing was the thermomoter at $24.

__________________
Uncle Fat is offline
 
Reply With Quote Quick reply to this message
Old 01-27-2005, 09:26 AM   #7
Roger
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2005
Posts: 22
Default

Quote:
Originally Posted by Witbier
I've cut open several with a saws-all. It's not that bad once you get the hang of it. There are a few web sites out there that will take you step by step through the process if you're up to it.

Try this one: http://www.brew-beer.com/kegs.htm

It's definitely easier with a second person there to help you hold the keg down. For fittings I used the Schmidling easy masher. Works perfectly.
Can't believe the stuff you chaps have over there, amazing. Brought a conical fermenter over to England on the plane, managed OK thro customs etc, was going to cost over $200 to ship, I wouldn't have one otherwise. Have just converted a picnic box masher the hard way.
__________________
Roger is offline
 
Reply With Quote Quick reply to this message
Old 01-27-2005, 02:24 PM   #8
Witbier
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2005
Location: Massachusetts
Posts: 29
Default

Quote:
Originally Posted by Roger
Can't believe the stuff you chaps have over there, amazing. Brought a conical fermenter over to England on the plane, managed OK thro customs etc, was going to cost over $200 to ship, I wouldn't have one otherwise. Have just converted a picnic box masher the hard way.
What size is the conical Roger? Have you had a chance to use it. It looks like they greatly simplify that part of the brewing process.
__________________
Witbier is offline
 
Reply With Quote Quick reply to this message
Old 01-27-2005, 05:16 PM   #9
Roger
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2005
Posts: 22
Default

Quote:
Originally Posted by Witbier
What size is the conical Roger? Have you had a chance to use it. It looks like they greatly simplify that part of the brewing process.
Yes Witbier, It is easier, just dump the crud out of the dump valve, primary & secondary in one tub with thermometer on the front. I bought a Mini Brew 8 from Alternative Beverage, holds my batch of 5 uk gals OK. I think it's 6.5 US gals. I've done about 8 batches in it.
__________________
Roger is offline
 
Reply With Quote Quick reply to this message
Old 01-27-2005, 05:32 PM   #10
Janx
Feedback Score: 0 reviews
 
Janx's Avatar
Recipes 
 
Join Date: Dec 2004
Location: San Francisco Bay Area
Posts: 1,688
Liked 13 Times on 9 Posts

Default

Quote:
Originally Posted by Roger
Yes Witbier, It is easier, just dump the crud out of the dump valve, primary & secondary in one tub with thermometer on the front. I bought a Mini Brew 8 from Alternative Beverage, holds my batch of 5 uk gals OK. I think it's 6.5 US gals. I've done about 8 batches in it.
Is it plastic or stainless?
__________________
Oh don't give me none more of that Old Janx Spirit
No, don't you give me none more of that Old Janx Spirit
For my head will fly, my tongue will lie, my eyes will fry and I may die
Won't you pour me one more of that sinful Old Janx Spirit
Janx is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
brewpot cabledawg Beginners Beer Brewing Forum 0 12-07-2008 11:59 AM
24 qt brewpot big enough? Wrathbone Extract Brewing 5 05-22-2008 08:00 PM
brewpot StallionMang Equipment/Sanitation 18 12-01-2007 01:18 PM
Brewpot ? scottmc Equipment/Sanitation 2 08-23-2007 02:04 PM
Anyone have this brewpot? McCall St. Brewer Equipment/Sanitation 1 04-11-2007 04:56 PM