Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Equipment/Sanitation (http://www.homebrewtalk.com/f11/)
-   -   just finished my mash/lauter tun (http://www.homebrewtalk.com/f11/just-finished-my-mash-lauter-tun-383848/)

davebstock 01-23-2013 05:33 AM

just finished my mash/lauter tun
 
2 Attachment(s)
Any thoughts on this setup? I have not done all grain yet but am setting up for it. I figured it would be easier to use flexible copper tubing and cap it. Wasn't sure if I would have trouble bending once the slots were cut. It kinked up a bit, but with just water it drains 5 gallons in three minutes. Put a 1/2" I.d. drain on it.

davebstock 01-23-2013 05:37 AM

When it finishes draining to the level of the valve, there are 28oz left in the tun. Is that to be expected or should the valve be lower? (Not that I could change the existing hole in the cooler)

teddy4xp 01-23-2013 05:52 AM

I dont think there is a correct answer....its just the way your system is. I think mine leaves 32oz behind. Just make sure you compensate for the 28oz when you are figuring out your water volume!


All times are GMT. The time now is 12:26 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.