Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Equipment/Sanitation (http://www.homebrewtalk.com/f11/)
-   -   Irish Coffin Box Question (http://www.homebrewtalk.com/f11/irish-coffin-box-question-97624/)

ISUBrew79 01-13-2009 07:51 PM

Irish Coffin Box Question
 
I am in the process of designing and building an Irish Coffin draft box to put on the top of my Oster 5.0 kegerator. Can anyone tell me what the distance between the hole for the shank to the top of the bar surface or drip tray should be? I think 9 or 10 inches would be sufficient clearance unless I was trying to fill larger vessels like pitchers or growlers.

Dude 01-13-2009 08:49 PM

When I built mine, I made the holes 10 inches. However, I have a bar mat underneath that is nearly an inch thick. Still only with 9 inches, a pint glass fits underneath no problem. I have a stout tap on one of my openings, and you don't even have to tilt a glass to get it under that.

So I'd say 9 inches would be fine.


All times are GMT. The time now is 03:58 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.