*Ss Brewing Technologies Giveaway - Enter Now!*

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > i need corny keg info...
Reply
 
LinkBack Thread Tools
Old 11-16-2011, 09:42 AM   #1
inhalingtrees
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2011
Posts: 16
Default i need corny keg info...

I just found a place that has used corny kegs for sale anything against them or any problems? Also they are pin lock, I am a beginner with kegs so I'm not sure what the different styles are for exactly like ball or pin lock....and with these kegs can you carbonate with both priming with sugar or co2 tank?

__________________
inhalingtrees is offline
 
Reply With Quote Quick reply to this message
Old 11-16-2011, 10:17 AM   #2
emjay
HBT_SUPPORTER.png
Feedback Score: 1 reviews
 
emjay's Avatar
Recipes 
 
Join Date: Jan 2011
Location: Toronto, Ontario
Posts: 12,694
Liked 1714 Times on 1602 Posts
Likes Given: 1

Default

Very few homebrewers buy new corny kegs. There's no problem with used ones, you might just need to replace the o-rings.

__________________
emjay is offline
 
Reply With Quote Quick reply to this message
Old 11-16-2011, 12:38 PM   #3
stevo155
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2008
Location: Derry, NH
Posts: 922
Liked 19 Times on 19 Posts
Likes Given: 3

Default

Pin locks are a little wider than ball locks, which may be an issue with space in a kegerator ( that little amount could be the difference between fitting 3 or 4 kegs in a kegerator ).

Used cornies are fine. As mentioned above, you just need to break them apart and replace the o-rings ( buy o-rings from McMaster-Carr and save a ton of money - search this forum for part #'s ). The big issue would be dents around the opening of the keg, which may allow co2 to escape if they can't seal properly.

Yes, you can carbonate wwith co2 as well as priming sugar in a keg. I naturally carbed a mild a couple years back and it was great.

I saw a brand new keg on sale for $78 the other day ( I think it was posted on Homebrew Finds ). I wonder if this is an indication that prices for new ones are coming down. It's getting to the point where the used ones are in short supply, and their prices are getting higher and higher.

__________________

BN Army for Life!!!

stevo155 is offline
 
Reply With Quote Quick reply to this message
Old 11-16-2011, 12:43 PM   #4
midwestsupplies
HBT_SPONSOR.png
HomeBrewTalk 2012 Vendor Giveaway Participate
Vendor Ads 
Feedback Score: 1 reviews
 
midwestsupplies's Avatar
Recipes 
 
Join Date: Aug 2010
Location: St. Louis Park, MN
Posts: 49
Liked 32 Times on 19 Posts
Likes Given: 3

Default

Most vendors that sell reconditioned kegs, will have both the ball lock and pin lock styles. The Ball lock are becoming harder to find in bulk, so we think there will be a big swing to the pin lock style. You will be able to prime or force carbonate with CO2 in either style. Feel free to live chat with our guys or send us an email. Pin Lock - 5 Gallon Reconditioned Keg

__________________

Beer and Wine Making Supplies since 1995
www.midwestsupplies.com

midwestsupplies is offline
 
Reply With Quote Quick reply to this message
Old 11-16-2011, 01:42 PM   #5
inhalingtrees
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2011
Posts: 16
Default

Thanks I think I'm guna have to buy them then. But what exactly is the ball or pin lock for? Is one harder to hookup than the other?

__________________
inhalingtrees is offline
 
Reply With Quote Quick reply to this message
Old 11-16-2011, 02:45 PM   #6
krenshaw
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
krenshaw's Avatar
Recipes 
 
Join Date: Dec 2010
Location: Lancaster, PA
Posts: 1,089
Liked 48 Times on 44 Posts
Likes Given: 27

Default

they're both easy to hook up, it just has to do with the gas/liquid terminals that attach to the top of the keg.. doesn't matter which you get, just try to stay consistent if you get more than one so you only need one type of connections in your setup

__________________

~ A fine beer may be judged with only one sip, but it's better to be thoroughly sure.

DOWN THE HATCH BREWING
Stainless Hop Spider | Wooden Brew Rig | Dual Hinge Keezer Build

Primaries.. oxy :-(
Keg 1: Apfelwein | Keg 2: BlackEyePA version2 | Keg 3: Summer Saison
Bottles: lots full and even more empty

krenshaw is offline
 
Reply With Quote Quick reply to this message
Old 11-16-2011, 05:54 PM   #7
inhalingtrees
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2011
Posts: 16
Default

Alright thanks

__________________
inhalingtrees is offline
 
Reply With Quote Quick reply to this message
Old 11-18-2011, 03:00 AM   #8
millaj92
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2010
Location: Plano, Texas
Posts: 142
Liked 2 Times on 2 Posts

Default

They are both the same volume, but as mentioned above, the pin locks (Coke style) are wider in diameter and shorter. You may need the skinnier ball lock (Pepsi style) to fit in your fridge or you might need the shorter pin locks to fit so try to work out your dimensions before you buy. Also, as mentioned, both are easy and neither is better, but ball lock fittings are a bit easier to find (same price). O-rings are cheap, easy, and mandatory to replace of course, and you can even replace the posts. You can put ball lock posts on a pin lock keg, and vice versa. One up on the make sure the main seal lip is in perfect shape because a new o-ring won't fix a dented lip. Another consideration is that the ball lock kegs usually have a pressure relief that you can operate manually any time you like. The pin lock kegs usually don't have this, but just a pressure based pressure relief system which is more for safety, not for convenience. I came across free pin locks so I built a 6 keg kegerator but when the fridge had to be replaced the kegs wouldn't fit so I was forced to switch to ball locks. The only real difference between the two (the pressure relief) made me happy with the way things turned out.

__________________
Talisman Ale Co.
Find your inspiration...
millaj92 is offline
 
Reply With Quote Quick reply to this message
Old 11-18-2011, 05:00 AM   #9
inhalingtrees
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2011
Posts: 16
Default

Yea I'm planning on building a keggerator I've already got the fridge just need corny kegs and fittings and hoses thanks for the advice

__________________
inhalingtrees is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools