Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > hows this look for a Direct fire mash tun?
Reply
 
LinkBack Thread Tools
Old 05-08-2008, 03:56 PM   #1
aekdbbop
Feedback Score: 0 reviews
 
aekdbbop's Avatar
Recipes 
 
Join Date: Sep 2006
Location: Nashville, TN
Posts: 2,772
Liked 8 Times on 7 Posts

Default hows this look for a Direct fire mash tun?

Just wanted to get your thoughts..

the insulation is a good 3 inches from the bottom, so hopefully there is no worry about it catching on fire.. ha

aekdbbop is offline
 
Reply With Quote Quick reply to this message
Old 05-08-2008, 05:18 PM   #2
ebeer
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2007
Location: Concord, CA
Posts: 198
Liked 1 Times on 1 Posts

Default

Just keep the flame low, very low...and you should be fine. I tried the insulation route, but with direct fire I don't really see it as being necessary. Low flame and constant recirc holds the temperature I need. One word of caution, watch out for the hole in the skirt by your valve. Flames, or even heat, could come out that hole and burn (or melt) the insulation.

Other that than, give a shot with a close eye the first few times.

__________________
My homebrew site
ebeer is offline
 
Reply With Quote Quick reply to this message
Old 05-08-2008, 05:20 PM   #3
GilaMinumBeer
In yo' garage, steelin' yo parts.
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
GilaMinumBeer's Avatar
Recipes 
 
Join Date: Jan 2008
Location: Oblivion
Posts: 47,621
Liked 4739 Times on 4377 Posts
Likes Given: 59

Default

+1 with ebeer. Don't see the need to insulate when you are firing it but, since you are done just watch the insulation.

__________________
GilaMinumBeer is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Beersmith and Direct Fire MLTs aekdbbop Brewing Software 1 10-24-2009 03:32 PM
Recirculating Direct Fire Mash - Carryover Temperature MNBugeater General Techniques 8 03-24-2009 08:51 PM
Direct Fire Mash vs. HERMS etc. - again korndog All Grain & Partial Mash Brewing 14 05-15-2008 05:07 AM
Direct fire mash tun? BrewSapiens Equipment/Sanitation 8 04-27-2008 04:21 PM
Direct fire mashtuns.. aekdbbop All Grain & Partial Mash Brewing 30 01-17-2008 12:34 AM