Ppeg34

Recipes 

My question is why do you feel compelled to go stronger?

StarSan works really well. At recommended dilutions it will sanitize every surface it contacts (that isn't already dirty).

Although I can't imagine that making it a bit stronger will hurt anything, it is going to be just as effective at recommended dilutions. Unless you are stripping zinc off of a copper heating element, but I am assuming thats not what you have in mind.

Franc103

Recipes 

I add the 0.5ml because of the limitations of my measuring device. I figure that given the 1.5ml/32 oz dosage, rounding up to 2ml is a better bet than rounding down to 1ml.

Perhaps I should get another syringe.

__________________
Dr. François

"We are what we pretend to be, so we must be careful about what we pretend to be."
--Kurt Vonnegut

darth5aint

Recipes 

Thanks everyone. Its hard to measure that small amount i wanted to get a spray bottle so i could sanitize my thief to see if it was ready to move to my secondary in a few days

iaefebs

Recipes 

It really isn't that hard to measure. I do it whenever I need a spray bottle full. You can get a syringe or eye dropper or pipette. Ask around. I squeeze the original bottle to fill up the 1oz section and suck out the amount I need. The only reason I remove the needle on a syringe is because it is a thick liquid.

__________________
Here you go, buddy; "Breakfast of Champions."

orangemen5

Recipes 

I have a 5 gl bucket filled w star sans and just submerge my spray bottle to fill it up.