Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > hopstopper users...
Reply
 
LinkBack Thread Tools
Old 02-20-2007, 08:34 PM   #1
the_bird
10th-Level Beer Nerd
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
the_bird's Avatar
Recipes 
 
Join Date: May 2006
Location: Adams, MA
Posts: 20,507
Liked 374 Times on 308 Posts
Likes Given: 99

Default hopstopper users...

I've got to get my hopstopper built this week. I've got some SS mesh from McMaster, 12"x24". Ballpark, what are the dimensions of a properly-sized hopstopper? Should I plan on making it pretty much as big as possible, use all my material up?

__________________
Come join Yankee Ingenuity!

"I'm kind of toasted. But I looked at my watch and it's only 6:30 so I can't stop drinking yet." - Yooper's Bob
"Brown eye finally recovered after the abuse it endured in Ptown last weekend, but it took almost a full week." - Paulie
"no, he just doesn't speak 'stupid'. i, however, am fluent...." - motobrewer
"... I'll go both ways." - Melana

That'll do, Pigley. That'll do.
the_bird is offline
 
Reply With Quote Quick reply to this message
Old 02-20-2007, 08:37 PM   #2
Chairman Cheyco
***DRAMATIZATION***
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Chairman Cheyco's Avatar
Recipes 
 
Join Date: Dec 2005
Location: Calgary
Posts: 3,274
Liked 7 Times on 7 Posts

Default

Mine is about a 5"x7" rectangle with a domed top, and it works great. I think the real ones are about 8" in diameter, also domed.

__________________

Once the wind has been broken, it cannot be fixed.

Chairman Cheyco is offline
 
Reply With Quote Quick reply to this message
Old 02-20-2007, 08:40 PM   #3
the_bird
10th-Level Beer Nerd
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
the_bird's Avatar
Recipes 
 
Join Date: May 2006
Location: Adams, MA
Posts: 20,507
Liked 374 Times on 308 Posts
Likes Given: 99

Default

How fine a mesh is yours? The material I got is a bit finer than I expected (so I'm thinking of erring on the "big" side).

__________________
Come join Yankee Ingenuity!

"I'm kind of toasted. But I looked at my watch and it's only 6:30 so I can't stop drinking yet." - Yooper's Bob
"Brown eye finally recovered after the abuse it endured in Ptown last weekend, but it took almost a full week." - Paulie
"no, he just doesn't speak 'stupid'. i, however, am fluent...." - motobrewer
"... I'll go both ways." - Melana

That'll do, Pigley. That'll do.
the_bird is offline
 
Reply With Quote Quick reply to this message
Old 02-20-2007, 08:42 PM   #4
Dude
Will work for beer
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Dude's Avatar
Recipes 
 
Join Date: Jan 2005
Location: Knob Noster, Missouri
Posts: 8,843
Liked 55 Times on 45 Posts
Likes Given: 5

Default

FWIW, the diameter of the screen on my hopstopper is about 9 inches.

Caught me just in time...kettle will be full of wort in about 15 minutes....

__________________
On Tap: Lake Walk Pale Ale -- Eternity (Raspberry Stout) -- Nutrocker -- Donnybrook Dark
Primary: Lake Walk Pale Ale
Secondary: Summit IPA
Up Next: Smoked Porter -- Pub Ale -- Watermelon Wheat
Planning:
Gone But Not Forgotten:

www.IronOrrBrewery.com
Dude is offline
 
Reply With Quote Quick reply to this message
Old 02-20-2007, 08:54 PM   #5
Chairman Cheyco
***DRAMATIZATION***
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Chairman Cheyco's Avatar
Recipes 
 
Join Date: Dec 2005
Location: Calgary
Posts: 3,274
Liked 7 Times on 7 Posts

Default

Quote:
Originally Posted by the_bird
How fine a mesh is yours? The material I got is a bit finer than I expected (so I'm thinking of erring on the "big" side).

Mine is standard window-screen mesh, which I believe is #18.
__________________

Once the wind has been broken, it cannot be fixed.

Chairman Cheyco is offline
 
Reply With Quote Quick reply to this message
Old 02-20-2007, 08:54 PM   #6
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,018
Liked 979 Times on 654 Posts
Likes Given: 28

Default

I plan to make mine today or tomorrow and I'm thinking of using a a piece 12" x 16" and fold it in half so that I only have to sew up 3 sides. I see that the hopstopper is round and sits horizontally but there's no reason it can't be rectangular and vertical. I'm just happy I found someone with some spare stainless wire because buying a whole roll is NUTS. More to come...

__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!

New Stuff?
Bobby_M is offline
 
Reply With Quote Quick reply to this message
Old 02-20-2007, 08:56 PM   #7
olllllo
[]-O-[]
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
olllllo's Avatar
Recipes 
 
Join Date: Apr 2006
Location: Phoenix, Arizona
Posts: 13,514
Liked 125 Times on 106 Posts
Likes Given: 13

Default

Well it has to have some (3rd) dimension because of the dip tube.

__________________
Rabbit And Coyote Schwag
Rob - Phoenix Ambassador to Milwaukee
Where did your avatar go?
Ginger Beer for Moscow Mules Bacon Vodka
Twitter
olllllo is offline
 
Reply With Quote Quick reply to this message
Old 02-20-2007, 08:59 PM   #8
the_bird
10th-Level Beer Nerd
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
the_bird's Avatar
Recipes 
 
Join Date: May 2006
Location: Adams, MA
Posts: 20,507
Liked 374 Times on 308 Posts
Likes Given: 99

Default

I'm not going to sew it; I have enough to spare where I'll fold it over on top of itself a couple times and crimp it down. Maybe I'll figure out a way of holding the crimp down in a few places (maybe drill a hold and use some small SS bolts), but sewing it up seems like such a PITA. Then again, I haven't started working it yet, so I don't know how well the crimp will hold, or if it's going to want to revert to its flat state.

Incidentally, the 12x24 piece from McMaster was like $12, plus $4.50 shipping, if anyone's looking to make one. They also sell a 12x60 piece for $20, but note that my piece was shipped flat - if they send the bigger piece flat, I bet shipping would be absurdly high (and they don't tell you ahead of time how much shipping is).

__________________
Come join Yankee Ingenuity!

"I'm kind of toasted. But I looked at my watch and it's only 6:30 so I can't stop drinking yet." - Yooper's Bob
"Brown eye finally recovered after the abuse it endured in Ptown last weekend, but it took almost a full week." - Paulie
"no, he just doesn't speak 'stupid'. i, however, am fluent...." - motobrewer
"... I'll go both ways." - Melana

That'll do, Pigley. That'll do.
the_bird is offline
 
Reply With Quote Quick reply to this message
Old 02-20-2007, 09:03 PM   #9
evanmars
EAC Wannabe
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
evanmars's Avatar
Recipes 
 
Join Date: Dec 2006
Location: Springport, Michigan
Posts: 830
Liked 26 Times on 19 Posts
Likes Given: 4

Default

You can probably use the bend in the dip tube to create the third dimension.

Check out McMaster-Carr www.mcmaster-carr.com for stainless mesh.

__________________
Consistency is only a virtue if you're not a screwup

Primary - 0
Secondary - 0
Kegged - 0
evanmars is offline
 
Reply With Quote Quick reply to this message
Old 02-20-2007, 09:07 PM   #10
Chairman Cheyco
***DRAMATIZATION***
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Chairman Cheyco's Avatar
Recipes 
 
Join Date: Dec 2005
Location: Calgary
Posts: 3,274
Liked 7 Times on 7 Posts

Default

Quote:
Originally Posted by the_bird
I'm not going to sew it; I have enough to spare where I'll fold it over on top of itself a couple times and crimp it down. Maybe I'll figure out a way of holding the crimp down in a few places (maybe drill a hold and use some small SS bolts), but sewing it up seems like such a PITA. Then again, I haven't started working it yet, so I don't know how well the crimp will hold, or if it's going to want to revert to its flat state.

The crimp will hold if you squeeze it in a vise, or gently hammer it. I folded mine 3 times, and it's holding fine.
__________________

Once the wind has been broken, it cannot be fixed.

Chairman Cheyco is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY Hopstopper Beerrific Equipment/Sanitation 22 03-22-2011 12:20 AM
DIY Hopstopper ScubaSteve DIY Projects 14 01-26-2009 02:34 AM
What do you think of this as a hopstopper? mr x Equipment/Sanitation 6 09-19-2007 06:01 PM
Braid instead of HopStopper? Cheesefood Equipment/Sanitation 11 03-11-2007 03:03 AM
Hopstopper davidkrau Equipment/Sanitation 5 04-24-2006 12:05 AM