Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > HERMS coil diameter and length for HLT

Reply
 
LinkBack Thread Tools
Old 03-09-2011, 12:35 PM   #1
Kerberbb
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2009
Location: Owasso, Oklahoma
Posts: 120
Default HERMS coil diameter and length for HLT

Setting up my Herms unit, and am wanting some input on the diameter and length of the coil for my HLT. I will have two bulkhead fittings, each measuring 1/2 inch. Therefore I was thinking of using 1/2 inch cooper, partly due to the fact all of my lines fitting are 1/2 inch so it should help with flow. I hear most people use 3/8 inch at a length of 25 feet, but would perhaps 10ft of 1/2 inch be just as good?

__________________
Kerberbb is offline
 
Reply With Quote Quick reply to this message
Old 03-09-2011, 12:55 PM   #2
MalFet
/bɪər nərd/
HBT_LIFETIMESUPPORTER.png
Feedback Score: 1 reviews
 
MalFet's Avatar
Recipes 
 
Join Date: May 2010
Location: NYC / Kathmandu
Posts: 8,203
Liked 1231 Times on 818 Posts
Likes Given: 561

Default

Nope. If my numbers are correct, 1/2inch nets you an extra 75% surface area, but you would need to have about 15ft of 1/2inch to get an equivalent surface area to 25ft of 3/8inch.

Whether or not 10ft is enough, though, is a different question, depending on your flow rate, agitation, desired speed of temperature change, etc.

__________________
MalFet is offline
 
Reply With Quote Quick reply to this message
Old 03-09-2011, 02:42 PM   #3
Great_Neck_Brewer
Feedback Score: 0 reviews
 
Great_Neck_Brewer's Avatar
Recipes 
 
Join Date: Mar 2008
Location: Great Neck, New York
Posts: 177
Liked 3 Times on 3 Posts

Default

20ft of 1/2" works fine

__________________
Great_Neck_Brewer is offline
 
Reply With Quote Quick reply to this message
Old 03-09-2011, 02:45 PM   #4
trent
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2007
Location: San Diego
Posts: 358
Liked 23 Times on 14 Posts

Default

I also use 20ft 1/2 it's fine.

__________________
trent is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
HERMS coil questions VonMessa Equipment/Sanitation 2 03-02-2011 03:04 PM
HERMS Coil Funkatollah Equipment/Sanitation 3 01-18-2011 01:47 PM
Looking for HLT with HERMS coil installed Sarrsipius Equipment/Sanitation 1 12-27-2010 04:15 PM
Optimum Length for a HERMS coil dutch101st Equipment/Sanitation 5 09-08-2010 01:01 AM
HERMS Coil... Stevorino Equipment/Sanitation 21 01-30-2009 09:22 PM