Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > HELP Needed with Brewers Equipment Brew Stand
Reply
 
LinkBack Thread Tools
Old 09-20-2011, 01:55 AM   #1
bmunos
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: Tulsa, OK
Posts: 289
Liked 11 Times on 9 Posts
Likes Given: 6

Default HELP Needed with Brewers Equipment Brew Stand

So as many of you who have dealt with marcus and Brewers Equipment know....I got SCREWED! But Im not here to complain about how TERRIBLE the service is, I just need some help. The stand was supposed to come with everything i needed and it didnt. I am missing the regulator that goes from the propane tank to the stand. I went to lows and purchased the propane regulator that goes to a grill but it doesn't seem to fit. It seems close but wont screw on. Could someone take a picture of how their stand is connected to propane so i can finally get brewing! It has been 3 months since I sent my order in and I havent been able to get ahold of marcus in a month. Any help would be greatly appreciated!

Below is a picture of the pluming i need to attach to the propane tank.

http://i383.photobucket.com/albums/o...s/101_2750.jpg

http://i383.photobucket.com/albums/o...s/101_2749.jpg

__________________
bmunos is offline
 
Reply With Quote Quick reply to this message
Old 09-20-2011, 02:53 PM   #2
BrewNinja1
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: Cross Plains, WI
Posts: 328
Liked 5 Times on 5 Posts

Default

A free bump for you and an observation. That looks like a standard black natural gas pipe thats been welded on. So you will need something to go in between. Easiest thing to do is take your reg to lowes, etc and get a piece of 1/2" black pipe from the fittings section and find a way to get there. Just somewhere to start if nobody else chimes in.

__________________
BrewNinja1 is offline
 
Reply With Quote Quick reply to this message
Old 09-20-2011, 04:51 PM   #3
OneHoppyGuy
HBT_SUPPORTER.png
HomeBrewTalk 2012 Vendor Giveaway Participate
Feedback Score: 0 reviews
 
OneHoppyGuy's Avatar
Recipes 
 
Join Date: Nov 2009
Location: Concord, CA
Posts: 1,704
Liked 40 Times on 33 Posts
Likes Given: 52

Default

You will need a 1/2" FPT to 3/8" Flare (45 degree) fitting, assuming the regulator has a 3/8" flare end.

This is a male fitting:


They are typical on gas appliances such as your range, furnace and water heater.
Lowes:
http://www.lowes.com/pd_16186-72906-...ngs&facetInfo=

I hope this helps.
One more thing... depending on the burners selected, the regulator you purchased may not be adequate.

BTW, my brewstands rock

__________________

Brewright. All Rights Reserved. We reserve the right to brew and to help you brew. To protect the brew and defend the brew. To make the brew and drink the brew.

BrewSteel.com
BrewSteel on Facebook


Last edited by OneHoppyGuy; 09-20-2011 at 04:53 PM. Reason: Added information
OneHoppyGuy is offline
 
Reply With Quote Quick reply to this message
Old 09-20-2011, 05:05 PM   #4
zoso124
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Gibsonia, PA
Posts: 18
Likes Given: 1

Default

Yes OneHoppyGuy is correct.

Then buy yourself one of these adjustable regulators.
http://kegcowboy.com/index.php?dispa...product_id=337

I had issues with my regulator that came with the stand (too much gas), this one solved my problems.

__________________
zoso124 is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Brewers Equipment Stand Review ks_medic Equipment/Sanitation 24 10-17-2011 03:42 AM
What propane equipment is needed for a brew tree? DUNDASJ Equipment/Sanitation 3 08-12-2011 05:24 PM
Equipment Help Needed mbischoff Equipment/Sanitation 1 12-11-2010 10:15 PM
Suggestions needed - want to buy my best man a piece of home brew equipment tornado681 Equipment/Sanitation 20 10-21-2008 03:18 AM