Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Has anyone screwed up the wiring to their deep freezer?

Reply
 
LinkBack Thread Tools
Old 12-05-2013, 03:33 AM   #1
j_dogg
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2013
Posts: 24
Default Has anyone screwed up the wiring to their deep freezer?

I managed to!
I got a little too impatient and with my "I can do this" attitude and cold beer on my mind, without any thought or research and I think I screwed up big time....
The worse part is I have two deep freezers...one larger one that I bought...and one tiny one that I found on the side of the road for FREE...
Guess which one I decided to experiment on?!...yeah, my good one.

Anyways, here's the deal...
I have a GE "Compact Chest Freezer 7". It was working like normal yesterday...
Unplugged it, took the side vent off, and took the top off. Today I decided I wasn't going to build a boxed frame to stick it in...too much time, money and it seemed easier to just flush everything up and attach all my wood trim directly to it. Well, in order to do this I decided to take the temperature control and light combo off and keep it inside by the compressor.
It seemed easy at first...I just popped the plastic frame off and was going to just it through...Except it didn't work like that...What ever the components are on the back of the controls, they were too wide to wide to fit through the slot. Instead of widening the opening, I thought It would be easier just to disconnect and reconnect all the wiring. I managed to remove the two ground wires, and the black and white wire clips going into the compressor. I pulled the plug through that was connected to it. The last thing that I failed to notice was the wire going into what I'm thinking is the temperature probe. There wasn't anything to remove as far as a fitting or bolt, so I just thought...why not cut it and splice it together later. After I cut it, I realized this wire is hollow, so it's probably not a normal wire. I pulled it through and positioned it inside. I stripped it back but I didn't have any wire nuts on hand so I just temporarily taped it together. I plugged the two clips in as well as I could remember and screwed the grounds back in. Now the momment of truth...I plugged it in and...NOTHING! I've tried switching the clips from different positions, messing with the temp dial, reseting my gfi, but there isn't even a light on. This would tell me it would have to be something wrong with the clips going to the power cord, right? I think I have them in the right place, but maybe they aren't facing the right way... Does anyone see or think of anything that comes to mind or know of any advice forums for freezers? I'm hoping it's just something I'm over looking again that is so simple. Sorry for the novel, but it's really stressing me out and I'm kicking myself in the ass for not thinking this one through.
Cheers

deepfreeze.jpg  
__________________
j_dogg is offline
 
Reply With Quote Quick reply to this message
Old 12-05-2013, 03:52 AM   #2
day_trippr
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Stow, MA
Posts: 9,410
Liked 1033 Times on 838 Posts

Default

Um....that "hollow wire" was probably a capillary tube leading to the bulb buried inside the space between the hump and the liner.

Even assuming you could obtain a complete replacement thermostat, I have no idea how you go about extracting the old bulb and inserting a new one.

But all is not lost, and you have choices: you can just take the two control wires in/out of the thermostat and short them together, then plug the line cord into an external controller, put the controller's probe inside the freezer, and let the controller run everything.

Alternatively, you can wire most external controllers to directly replace the thermostat function - actually route the in/out wires that used to go to the OEM thermostat through the controller's relay. But frankly that's not going to accomplish anything more than just controlling via the line cord.

In any case, the original thermostat has gone to Keezer Heaven. If you want to verify that the rest of the wiring is intact, short the two thermostat wires together and the compressor should light up...

Cheers!

__________________
day_trippr is online now
 
Reply With Quote Quick reply to this message
Old 12-05-2013, 03:52 AM   #3
JuanMoore
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
JuanMoore's Avatar
Recipes 
 
Join Date: Oct 2009
Location: The Old Pueblo
Posts: 15,982
Liked 3202 Times on 3106 Posts
Likes Given: 18

Default

The hollow tube you cut is probably the phial/capillary, which is filled with a gas that expands and contracts with temperature changes, which throws the switch in the thermostat on and off. With the tube cut, the gas has escaped, and the thermostat will not function. I'm guessing you plan on using an external temp controller of some sort? If so, you should be able to bypass the thermostat by connecting the two sides of the switched wire together, and rely on the external controller for temp control.

__________________
Keezer Soze

Yuri rubs it out with 60 grit... wouldn't even feel a tenga egg. -Randar

, place entry ox dixla to suck. Fcxk fwnpoo and passed. Hel an my spupid ass. OK. - TXCrash
JuanMoore is offline
 
Reply With Quote Quick reply to this message
Old 12-05-2013, 11:48 AM   #4
j_dogg
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2013
Posts: 24
Default

Thanks for your help!
I was planning on using a Johnson controller that is just plug and play...which has a probe.
I didn't want to mess with love controllers that you have to wire in.
Is there any how to's or tutorials on bypassing or shorting them together?
Cheers!

__________________
j_dogg is offline
 
Reply With Quote Quick reply to this message
Old 12-05-2013, 05:35 PM   #5
j_dogg
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2013
Posts: 24
Default

Thanks for everyone's help!
You've managed to save my Keezer.
I just cut out the thermostat and wired the plug straight to the compressor....simple.
Cheers!

__________________
j_dogg is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB Deep Freezer/Chest Freezer - Chicago uncleben113 Want to Buy 0 10-15-2013 07:00 PM
Deep freezer for lagering dmiller224 Equipment/Sanitation 3 07-01-2013 04:37 AM
Deep Freezer for Temp Control DiscipleofDionysus General Techniques 9 04-30-2013 03:18 AM
How deep a freezer do I need? LarryC General Beer Discussion 5 07-02-2012 10:42 AM
Just picked up a free deep-freezer - is it big enough? Eskram Bottling/Kegging 7 09-21-2005 04:25 AM



Newest Threads