Electric Brewing Supply 30A BCS Giveaway!


Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Grain Mills
Reply
 
LinkBack Thread Tools
Old 04-17-2005, 01:42 AM   #1
Tony
Feedback Score: 0 reviews
 
Tony's Avatar
Recipes 
 
Join Date: Feb 2005
Location: Saugus, MA
Posts: 917
Liked 2 Times on 2 Posts

Default Grain Mills

Okay, I am in the market for a grain mill. I want something I can use for most all grain recipes, and would rather have it be something that I use over a 5 gallon bucket than afix to a table with a clamp.

Who can give me some recomendations on a good one to buy?

__________________
Up Next: Cherry Chocolate Rye
Up Next: Gold Nugget IPA
On Tap:Pawtucket Patriot
Dead Soldier:Hop Rod Rye Stout
Dead Soldier: Imperial Hell Fire Ale
Tony is offline
 
Reply With Quote Quick reply to this message
Old 04-17-2005, 09:22 PM   #2
Tony
Feedback Score: 0 reviews
 
Tony's Avatar
Recipes 
 
Join Date: Feb 2005
Location: Saugus, MA
Posts: 917
Liked 2 Times on 2 Posts

Default

Well, I looked around and found the "Schmidling malt mill" and decided to buy one. Got it stright from Schmidling for $110 plus shipping.

Has anyone used one of these? I read all kind of reviews on it, and it looked to be good enough for me. Its the "P" model, unadjustable.

__________________
Up Next: Cherry Chocolate Rye
Up Next: Gold Nugget IPA
On Tap:Pawtucket Patriot
Dead Soldier:Hop Rod Rye Stout
Dead Soldier: Imperial Hell Fire Ale
Tony is offline
 
Reply With Quote Quick reply to this message
Old 04-18-2005, 02:39 AM   #3
DyerNeedOfBeer
Barley Sober
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
DyerNeedOfBeer's Avatar
Recipes 
 
Join Date: Mar 2005
Location: Columbus, MS.
Posts: 256
Default

I have done a bit of research... to no avail. It seems everyone is happy with the grain mill they get. Most articles I read list the same four or five mills and say they are all good.

Well, with no one particular model standing out in the reviews, I have decided to order the Barley Crusher with the 15 lb. hopper. I'm gonna spend the bit extra for the large hopper so in case this hobby grows (which it seemingly will ) I will have equipment that I can still use.

I will order this tomorrow morning... just a short delay to allow anyone with experience on this mill to comment on it. I don't want to delay any longer than that because I have been shopping for one for two weeks and my head hurts from it .

I'm afraid this does not answer your question since I have the same question as you, but let me know what you think of yours after a few uses and I will update this thread as to my experiences and maybe others can benifiet from this thread in the future.

__________________
DyerNeedOfBeer is offline
 
Reply With Quote Quick reply to this message
Old 04-18-2005, 03:29 AM   #4
Tony
Feedback Score: 0 reviews
 
Tony's Avatar
Recipes 
 
Join Date: Feb 2005
Location: Saugus, MA
Posts: 917
Liked 2 Times on 2 Posts

Default

Well, it looks like we will have to try em out and let each other know then!

I never even saw the Barley Mill. Im curious to know how it works for you!

__________________
Up Next: Cherry Chocolate Rye
Up Next: Gold Nugget IPA
On Tap:Pawtucket Patriot
Dead Soldier:Hop Rod Rye Stout
Dead Soldier: Imperial Hell Fire Ale
Tony is offline
 
Reply With Quote Quick reply to this message
Old 04-26-2005, 02:16 AM   #5
DyerNeedOfBeer
Barley Sober
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
DyerNeedOfBeer's Avatar
Recipes 
 
Join Date: Mar 2005
Location: Columbus, MS.
Posts: 256
Default

Barley Crusher is in a few cents under 150 bucks included S.&H. and the upgrade to the 15# hopper. For this price, it is a very competitively priced mill. Adjustable rollers, hopper, mount to go on top of a five gallon pail, handle and can be directly driven by 3/8" drill chuck with no additional parts (or cost). The construction seems top notch. I will use it this weekend and post again. I've yet to use any other so I can't compare the finished product with that of other mills unfortunately, but I will reference what I have read as being a good crush.
__________________
DyerNeedOfBeer is offline
 
Reply With Quote Quick reply to this message
Old 04-26-2005, 03:13 AM   #6
Tony
Feedback Score: 0 reviews
 
Tony's Avatar
Recipes 
 
Join Date: Feb 2005
Location: Saugus, MA
Posts: 917
Liked 2 Times on 2 Posts

Default

I just got mine today as well. I will have to get my next recipe supplies and put her to use and post a review.

__________________
Up Next: Cherry Chocolate Rye
Up Next: Gold Nugget IPA
On Tap:Pawtucket Patriot
Dead Soldier:Hop Rod Rye Stout
Dead Soldier: Imperial Hell Fire Ale
Tony is offline
 
Reply With Quote Quick reply to this message
Old 05-04-2005, 08:10 PM   #7
Rhoobarb
Feedback Score: 0 reviews
 
Rhoobarb's Avatar
Recipes 
 
Join Date: Jan 2005
Location: Woodstock, GA
Posts: 3,573
Liked 17 Times on 12 Posts
Likes Given: 2

Default

I just saw on another forum that The BarelyCrusher is offering free shipping to celebrate National Homebrew Day
between May 1st and until May 7th on both the 7 lb. & 15 lb units.

This places the 7 lb unit at $109.50 - under the Schmidling unit, which I was planning on buying. I may have to get one of these while the getting is good!

__________________
Rhoobarb is offline
 
Reply With Quote Quick reply to this message
Old 05-04-2005, 10:22 PM   #8
DyerNeedOfBeer
Barley Sober
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
DyerNeedOfBeer's Avatar
Recipes 
 
Join Date: Mar 2005
Location: Columbus, MS.
Posts: 256
Default

Used the Barley Crusher for the first time just this past weekend. Good grind (from the little experience I have to speak from) and adjustments are easy to make so you can tweak in on that perfect grind. I'm just doing grains for steeping right now so I haven't done alot. Used the hand crank for the little I had to do. I'm happy so far.

__________________
DyerNeedOfBeer is offline
 
Reply With Quote Quick reply to this message
Old 05-16-2005, 04:50 AM   #9
rixport
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2005
Location: Intervale NH
Posts: 22
Default Schmidling Malt Mill

Quote:
Originally Posted by Tony
Well, I looked around and found the "Schmidling malt mill" and decided to buy one. Got it stright from Schmidling for $110 plus shipping.

Has anyone used one of these? I read all kind of reviews on it, and it looked to be good enough for me. Its the "P" model, unadjustable.
I've use one of Jack's mills for the past 6 years. Before that I used one that came from the defunct (I believe anyway) Brewtek. The only thing I dont like about it is the rubber ring drive starter for the undriven roller. It will eventually break and is hard to replace and hard to do without. I finally started feeding a leather strand (which i later fish out of the mash) to get the other wheel turning. Other than that, it's an awsome piece of gear.

Ken
__________________
rixport is offline
 
Reply With Quote Quick reply to this message
Old 05-16-2005, 05:00 AM   #10
DyerNeedOfBeer
Barley Sober
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
DyerNeedOfBeer's Avatar
Recipes 
 
Join Date: Mar 2005
Location: Columbus, MS.
Posts: 256
Default

Quote:
Originally Posted by rixport
the rubber ring drive starter for the undriven roller
Do you find this neccesary? I guess you wouldn't run the leather through if it werent... The 'Barley Crusher' also has one of these but it states that this piece need not be replace once it wears out. I'm just curious if I will be needing to be concerned over this in the future. I was kinda thinking that the grains alone would get the 'ball' to rolling...
__________________

Beer lovers make better drinkers.

DyerNeedOfBeer is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Grain Mills jasonsbeer Equipment/Sanitation 14 09-13-2009 08:04 PM
grain mills ThirstyHobbit Equipment/Sanitation 7 12-12-2008 02:07 AM
Grain mills plumber Equipment/Sanitation 7 12-10-2007 08:20 AM
Grain Mills covered95 Equipment/Sanitation 14 11-25-2007 02:06 AM
Grain Mills ontap@home Equipment/Sanitation 8 05-18-2007 01:17 PM