HarvInSTL

Recipes 

The only thing I have left to finish up with on my Brutus 10 clone is hooking up the pilot lights.

Lonnie's design uses a .5psi regulator. I was hoping to use a 20-30psi regulator (as well my STC valves need at least 5psi) but all of the flexible tubbing is rated for .5psi and I have so far been unable to find anything local that would support that 20-30psi range.

Here is what I purchased from Ace today for $11.

http://www.buy.com/prod/plumb-shop-cssd54-24-p-24-stainless-steel-gas-connector/q/loc/63024/204603576.html

Thoughts?

__________________
Primary: Cherry Vanilla Melomel, Blueberry melomel, Orange Cranberry Melomel, Port, Orange Blossom Muscat, Dubbel, Golden Strong

Secondary: 9/9/9/-My version, Carbernet Sauvignon, Merlot, Raspberry Melomel

On deck: Tripel, 5 day IPA Squared, White Russian Imperial Stout

Live in Saint Louis, MO? Then check out www.stlbrews.org and www.garagebrewers.com

Bobby_M

Recipes 

It's rated at .5 psi because that's what natural gas runs. If you're running propane, I don't really think it's going to burst the flexpipe unless you've flexed it many times and create a weak point. It would probably take 100psi.

__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!

Personal Website, All Grain Primer, Keg Polishing, etc... | Youtube Channel