New Giveaway - Wort Monster Conical Fermeneter!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Electric, CIP, Apartment design - need feedback




Reply
 
LinkBack Thread Tools Display Modes
Old 12-31-2010, 03:27 AM   #1
aangel
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2010
Location: Toronto, Ontario
Posts: 3
Liked 2 Times on 1 Posts

Default Electric, CIP, Apartment design - need feedback

So my working conditions are a little unique:

-I live in an apartment building, so propane's out, and
-I don't pay for hydro (water OR power) so that's a bonus

I have a few design goals for this setup:

-Clean-in-place / sanitize-in-place is a must. I've heard/seen how much time and effort are taken up by sanitizing and I want to cut that down to a minimum
-Electric is also a requirement
-As small space foot print as possible

So, with all this in mind I have a few questions. I guess first I'll summarize my idea of the brewing process so that you guys can correct me on whatever bad assumptions or ideas I have.

Mashing:

My understanding of the process is:

-you crack your grains in a mill or something
-then put them at the bottom of a mash, sitting on a false bottom
-you then pour a certain volume of heated water onto the grain
-grains then form a bed overtop the false bottom through which the liquor filters through
-at some variable rate, you pump out the liquor from the bottom, use a heat exchange method to heat it up, and pour it back into the top of the mash tun. Recirculating the liquor through the bed of grains in this way helps "wash" the sugar and other water-soluble compounds off the grains and into the liquor
-after a certain amount of time at your certain temperature, you may switch to a higher temperature & continue...or not. Either way at some point enough is enough so you drain your liquor into a boil kettle
-while the kettle does its thing, clean all the grains and crap out of your mash tun

Boiling

my understanding of this is:

-add any adjunct sugars you need to your liquor
-you boil the crap out of your liquor for a certain period of time
-during this boil you add hops for bitterness, flavor, and aroma at different times for each
-a high boil is key for something called a hot break which I think is related to causing certain proteins to denature, stop being soluble in the liquor, and collect at the bottom...or top...or something
-after the boil you drain the liquid, now called wort, out of the kettle whilst filtering out the leafy hop stuff and the hot break proteins too
-you then use some kind of chiller to rapidly cool your wort down, causing a "cold break" where other proteins will precipitate out of solution and settle at the bottom...of the next container?

Fermentation

Forgive me, my understanding of this process is pretty hazy. Yay organic chem. In a nutshell:

-you put your now-chilled wort into a fermenter
-you "pitch" a yeast culture (preferably an active one vs a dormant one) in with the wort
-seal it up, and control the temperature inside the fermenter to be optimal for the yeast culture you're using. Indoors that means keeping it cool, rather than warm
-for a certain amount of time (how do you know when it's over?) you let fermentation do its thing
-the yeast'll run out of sugar and go dormant again, "flocculating" which I guess means turning into clumpy floateys that either, well, float, or sink depending on your yeast
-you then remove your beer from the fermenter, into another container for "lagering" (and I'm not really sure about that process) or get it ready for bottling or kegging
-collect your trub if you want to make another batch soon, since there should be a goodly amount of live yeast there

Kegging/Bottling

My understanding of this is:
-don't filter your beer
-heat the beer up with priming sugar into solution
-pour into bottles and cap
-residual yeast will convert the sugar to carbon dioxide (amongst other things?) naturally carbonating your beer

OR

-filter your beer to remove any remaining proteins, trub, dead, dormant, and active yeast
-pump it into a keg
-pump some pressure of co2 into the keg to force carbonate your beer
-either keep it in your keg or bottle it at this point

Now, that out of the way, this is what I have in mind (so far) for a setup:

Mashing: big metal tun with a false bottom. How does cleaning one of these things work? Can I lift the false bottom up & out like a tray with all the spent grain sitting in it? Also, for mashing temperature control and circulation, a variable flow inline pump, and a PID-controlled electric heating element in the hot water tank outta do the trick?

Mash tun to Boil Kettle: valve, pump (or gravity?) - kettle

Boil kettle: i'd say PID-controlled heating element but really do you need PID control? maybe if the element's capable of utterly scorching the liquor you should dial it down a notch but PID seems useless here. Adding the hops seems like something that can be done by hand...do you put the hops in a sackcloth bag or something similar to prevent them from getting all over the place? I imagine the boiling provides all the volatility needed to extract the oils and alpha/beta acids from the hops even if they're in a sack

chilling: a few valves, a plate chiller...this one seems pretty simple. would you want to filter your wort first since organic matter's sure to accumulate in your plate chiller? ...Is there a way of cleaning these chillers out?

fermenter: i guess i'll need...a port to drop the yeast through...another port for co2 blowoff, a bottom port to collect trub, and another port to collect the beer out of? I'm thinking of going with a conical fermenter, seems like help separating the trub and maybe save me a filtration step or two. Controlling the temperature seems critical, so put the fermenter in a fridge with a PID controller seems like that way to go. I saw warnings about the duty cycle of fridge compressors, so maybe have some water or glycol jacketing or something as a thermal buffer/reservoir, that way temperature changes happen much more slowly?

the only obvious places for automation seem to be timers, valve controls, and temperature controls. Temp controls seem to be the most critical while the others are "nice to haves".

filter: is there reusable filter media for this kind of application?

Finally: what strategies / methods are there to reduce the cleaning time/footprint of a home brewing setup? Is clean-in-place/sanitize-in-place a possibility?

Haha thanks a bunch to anyone who made it this far in the post. Your feedback is much appreciated.



__________________
aangel is offline
 
Reply With Quote Quick reply to this message
Old 12-31-2010, 01:12 PM   #2
lackey2000
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: Denver
Posts: 120
Liked 6 Times on 4 Posts
Likes Given: 7

Default

Wow, you have a lot of questions. I began typing answers but I think my baby girl is beginning to wake up so I didn't have time to finish. I apologize for not giving you answers to your exact questions but my 1 year old stirs.

You've definitely have done your homework and seem to have a great grasp of the process despite not having any hands on experience in the process.

Instead of answering I'll make the following suggestions:

1) Start out small and simple and then build/tailor/fine tune your process from there. You have a lot of great ideas but not all of them need to be implemented to brew beer. Maybe start with an extract brew so that you can work on boiling, adding hops, cooling and fermenting. Then later, you can add the all grain piece.

2) Join/attend a local home brew club and find someone to watch on their brew day. I learned more from actually seeing someone brew and getting a little hands on experience than I ever did from a book or website.

I think after you've had a chance to make a couple of beers yourself, most of your questions will answer themselves.

Best of luck and post updates on your progress.



__________________
fermenting: Edwort's Apfelwein
kegged: soda h2o, Belgium Pale Ale
, SMaSH IPA, Nora Bear's Brown
killed: IPA 'lite', Kölsh
current setup: under review
lackey2000 is offline
 
Reply With Quote Quick reply to this message
Old 12-31-2010, 06:31 PM   #3
Sawdustguy
Feedback Score: 1 reviews
Recipes 
 
Join Date: Mar 2009
Location: Manorville, New York
Posts: 2,758
Liked 27 Times on 25 Posts

Default

It would be alot easier for you just to read something like Palmer's "How to Brew". I just skimmed over what you wrote and there were a couple of thing I caught without reading it closely.

1. Recirculating the wort through a heat exchanger does not rinse sugars from the mash. It gets the garain and husk material out of the mash while maintaing a constant mash temperature.

2. You do not heat the beer when addding priming sugar for bottling.

I am sure there is alot more to comment on. I will let the other members chime in.

__________________

Guy

Brewery URL: Black Dog Brewery NY

BBQ Team URL: Two Fat Polocks BBQ Team

Sawdustguy is offline
 
Reply With Quote Quick reply to this message
Old 12-31-2010, 09:14 PM   #4
ScubaSteve
Feedback Score: 0 reviews
 
ScubaSteve's Avatar
Recipes 
 
Join Date: May 2007
Location: New Bern, NC
Posts: 3,669
Liked 60 Times on 45 Posts
Likes Given: 10

Default

HowToBrew is a great free resource. You need a fundamental understanding of the process/science; then you can make decisions about what's important to you and how you want to do it. This forum is also a FANTASTIC resource...but you need to be able to weed out opinion from fact. Search for Jkarp's countertop brutus 20 or "CB20"....should get you pretty far in an apartment. Different kinds of beer use different equipment too.....so knowing what you will brew will help you decide what you want/need.

ScubaSteve is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Apartment Dwellers or the Space-Challenged - An awesome discovery! fastricky Equipment/Sanitation 1 03-10-2010 01:28 AM
2 Vessel Apartment All Grain (pics) MikeRLynch Equipment/Sanitation 12 01-18-2010 02:19 PM
Apartment brewers' faucet hose adapter gtpro Equipment/Sanitation 3 01-06-2010 03:20 AM
Apartment Brew Pot Question ChefMichael01 Equipment/Sanitation 6 01-08-2009 07:47 PM
Which manifold design D*Bo Equipment/Sanitation 3 11-28-2007 04:31 AM