Happy HolidaySs Giveaway - Last Sponsor Giveaway of the Year!

Come Enter the BrewDeals/FastFerment Giveaway!


Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > dang i installed the wrong pid again!!! help
Reply
 
LinkBack Thread Tools
Old 07-12-2009, 06:27 AM   #31
keithster
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: San Marcos, California
Posts: 42
Default

Thanks for your reply.

Actuall I want to use one PID for the freezer. Have it turn on until it reaches the desired temp and then shut off until it starts to get warm again. You know, the same thing the built in temp controller does.

The second pid will be used to power a fan to circulate cold air for a small cold room. That fan will come on if the temp goes above 68 or whatever.

I just want a controller that I can run 120v to, wire the freezer or fan to, set the temp, and all is good.

__________________
keithster is offline
 
Reply With Quote Quick reply to this message
Old 07-12-2009, 07:41 AM   #32
keithster
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: San Marcos, California
Posts: 42
Default

Sorry, getting late and made a duplicate post

__________________

Reason: duplicate post..... I'm a dope
keithster is offline
 
Reply With Quote Quick reply to this message
Old 07-13-2009, 01:16 AM   #33
ClaudiusB
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2007
Location: El Paso, Texas
Posts: 1,284
Liked 64 Times on 54 Posts
Likes Given: 122

Default

keithster this is a good controller wit ON-OFF control mode Universal 1/16 DIN PID Temperature Controller [SYL-2362] - $41.95 : auberins.com, Temperature control solutions for home and industry

or the Love TS Dwyer Instruments - Series TS


Cheers,
ClaudiusB
ClaudiusB is offline
 
Reply With Quote Quick reply to this message
Old 07-29-2009, 06:26 AM   #34
kickflip_mj
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2008
Posts: 945
Liked 98 Times on 66 Posts
Likes Given: 3

Default

so sorry for the late response...


sawdust guy,

i was looking at your diagram and are you saying the prongs of the wall wort are conected to a seperate power source and the negative output of the wall wort is connected to #7 and the positive is connected to the SSR?

__________________
kickflip_mj is offline
 
Reply With Quote Quick reply to this message
Old 07-29-2009, 09:50 AM   #35
Sawdustguy
Feedback Score: 1 reviews
Recipes 
 
Join Date: Mar 2009
Location: Manorville, New York
Posts: 2,772
Liked 29 Times on 25 Posts

Default

The wall wort can be connected to any 120 Volt AC source that is handy. Yes, connect the negative output of the wall wort to terminal #7 on the SYL-2342 and the positive output of the wall wort is connected to the (+) terminal of the SSR. Don't forget to connect a wire from terminal #8 on the SYL-2342 (-) terminal of the SSR.

__________________

Guy


Sawdustguy is offline
 
Reply With Quote Quick reply to this message
Old 07-29-2009, 03:15 PM   #36
kickflip_mj
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2008
Posts: 945
Liked 98 Times on 66 Posts
Likes Given: 3

Default

just the man i was looking for.

thank you for the response sawdustguy. i have finally got back to finishing my set up after working to much. just aquired a new danby fridge so the conversion begins. thank you for all your help so far.

__________________
kickflip_mj is offline
 
Reply With Quote Quick reply to this message
Old 07-29-2009, 03:49 PM   #37
LooyvilleLarry
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Louisville,KY
Posts: 988
Liked 4 Times on 4 Posts
Likes Given: 2

Default

I would SOOOO give the guy at Aubern a ring a ling. He has always worked hard and fair for me and others here. I bet he can solve your problem.

__________________
Primary
Orange Cascade Pale Ale -

Secondary

Kegged
BeeCave Haus Ale - 6%
Bells Two Hearted, round 2- 6.1%
SNPA Clone (Chilled )
Hard Lemonade

Shiraz - 6 gal
LooyvilleLarry is offline
 
Reply With Quote Quick reply to this message
Old 08-06-2009, 03:42 PM   #38
kickflip_mj
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2008
Posts: 945
Liked 98 Times on 66 Posts
Likes Given: 3

Default

so i need help programming this dang thing.. the temp keeps raising 4 degrees above the set temp... could someone help me dial this thing in? i spent like 3 hours trying to figure it out

__________________
kickflip_mj is offline
 
Reply With Quote Quick reply to this message
Old 08-06-2009, 09:29 PM   #39
kickflip_mj
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2008
Posts: 945
Liked 98 Times on 66 Posts
Likes Given: 3

Default

any help would be appreciated

__________________
kickflip_mj is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Blow off tube installed... now what? underwaterdan General Beer Discussion 13 01-12-2009 06:23 PM
Dang it - Bad starter LooyvilleLarry Beginners Beer Brewing Forum 3 09-05-2008 04:50 PM
New Faucets Installed! Tony Bottling/Kegging 1 01-14-2006 07:10 PM



Newest Threads

LATEST SPONSOR DEALS