Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > cleaning bucket fermenters

Reply
 
LinkBack Thread Tools
Old 01-23-2014, 11:48 PM   #1
richl025
Baby Brewer
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2014
Location: Brentwood, TN
Posts: 69
Likes Given: 26

Default cleaning bucket fermenters

Question for the more experienced brewers here: when using a plastic "bucket" fermenter, thought I read somewhere to not use abrasive cleaners? Something about allowing little crevices to form that are harder to sanitze?

What exactly counts as "abrasive"? I get that it means "no brillo pads", but what about plastic bristle brushes?

If that's out of bounds as well, what do you clean the krausen "ring" off with? With my first 2 batches I've had quite a bit of gunk and needed a fair bit of elbow grease to get it clean, but I don't want to damage my equipment....

__________________
richl025 is offline
 
Reply With Quote Quick reply to this message
Old 01-24-2014, 02:58 AM   #2
bstacy1974
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2010
Location: Fairbanks, AK
Posts: 125
Liked 9 Times on 6 Posts
Likes Given: 8

Default

Give it a good soak with oxyclean and hot water. I just run my hand lightly around the krausen ring. My kit came with a plastic bristled brush but it's always in my brewing cabinet when I need it. I don't think the bristles would scratch the bucket as long as you don't scrub to the point the twisted metal is touching the bucket. I'd avoid nesting multiple buckets as well.

Sent from my Nexus 10 using Home Brew mobile app

__________________
Primary: Baltic Porter
Bottled:
bstacy1974 is offline
 
Reply With Quote Quick reply to this message
Old 01-24-2014, 03:12 AM   #3
Foosier
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Foosier's Avatar
Recipes 
 
Join Date: Aug 2012
Location: Indianapolis, IN
Posts: 296
Liked 45 Times on 38 Posts
Likes Given: 13

Default

I use hot water dish soap and a paper towel in my buckets. Usually the krausen comes off pretty quickly. I think the key is to clean it a soon as you empty it. If you wait it could dry in place and that would be harder to get off. But as bstacy said, a soak of hot water and oxyclean will get the gunk off pretty well too.

__________________
Foosier is offline
 
Reply With Quote Quick reply to this message
Old 01-24-2014, 03:19 AM   #4
kh54s10
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2011
Location: Tiverton, Rhode Island
Posts: 6,484
Liked 569 Times on 484 Posts
Likes Given: 156

Default

Oxyclean soak overnight then rinse well and use a dishcloth if needed.

__________________
kh54s10 is offline
 
Reply With Quote Quick reply to this message
Old 01-24-2014, 12:25 PM   #5
boscobeans
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2012
Location: Schenectady, New York
Posts: 913
Liked 111 Times on 91 Posts
Likes Given: 306

Default

Quote:
Originally Posted by richl025 View Post
Question for the more experienced brewers here: when using a plastic "bucket" fermenter, thought I read somewhere to not use abrasive cleaners? Something about allowing little crevices to form that are harder to sanitze?

What exactly counts as "abrasive"? I get that it means "no brillo pads", but what about plastic bristle brushes?

If that's out of bounds as well, what do you clean the krausen "ring" off with? With my first 2 batches I've had quite a bit of gunk and needed a fair bit of elbow grease to get it clean, but I don't want to damage my equipment....
Some buckets will fit in a dishwasher, with the top rack taken out.. DO NOT LET IT GO THROUGH THE DRY CYCLE.

Get to cleaning it as soon as you rack to your bottling bucket. The sooner the better. A good spray with HOT water should clean out the trub and soften if not wash away the krausen ring. Wash cloth NO scrubby pads if needed. Fill and soak with oxy. Rinse and let dry .

bosco
__________________
boscobeans is offline
 
Reply With Quote Quick reply to this message
Old 01-24-2014, 04:48 PM   #6
zarfus
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2014
Posts: 23
Liked 8 Times on 6 Posts
Likes Given: 2

Default

Quote:
Originally Posted by kh54s10 View Post
Oxyclean soak overnight then rinse well and use a dishcloth if needed.
This. I just keep my buckets/carboys filled with oxyclean water all the time, empty and rinse the hell out of them when I need it.
__________________
zarfus is offline
 
Reply With Quote Quick reply to this message
Old 01-24-2014, 07:08 PM   #7
Braufessor
HBT_SUPPORTER.png
Feedback Score: 5 reviews
 
Braufessor's Avatar
Recipes 
 
Join Date: Dec 2011
Location: NE Iowa, Iowa
Posts: 1,654
Liked 368 Times on 259 Posts
Likes Given: 293

Default

As mentioned - hot water, soaking, etc.

When I drain a bucket, I immediately hose it out with hot water ( I have a big double washbasin sink in my brewroom). I then soak it in hot PBW water for a few hours and use a paper towel to wipe where the kraeusen ring was. At that point, everything has pretty much dropped off already, or comes right off. Rinse thoroughly and it is ready to go next time.

__________________
Kegged/Serving: Dortmunder, Bo-Pils, Nugget Nectar Clone, Citra IPA, One Hearted Ale, Heady Topper Junior, Scottish 70, British Dark Mild
Bottled
: Barley Wine, Sour Belgian Golden on Cherries
Primary: Ordinary Bitter, Bourbon Barrel Imperial Porter
Secondary: Bo-Pils, Sour Cherry Stout,
Future Brews: German Pilsner, Dortmunder, Porter, APA, IPA, British Dark Mild, More...... More....... Beer.......
Braufessor is offline
 
Reply With Quote Quick reply to this message
Old 01-24-2014, 08:58 PM   #8
LordUlrich
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2010
Location: Rochester, MN
Posts: 532
Liked 12 Times on 11 Posts
Likes Given: 8

Default

I soak in pbw and use a fairly new sponge.

Sent from my DROID RAZR HD using Home Brew mobile app

__________________

Don't take any more faith in anything I say than you would anyone else on the internet. If you listen to what I say, then hurt your self or break something it is your own fault, I am just expressing my opinion or experience.
THINK for your self!!

LordUlrich is offline
 
Reply With Quote Quick reply to this message
Old 01-24-2014, 09:30 PM   #9
theck
Feedback Score: 3 reviews
Recipes 
 
Join Date: Sep 2013
Location: lakewood, ohio
Posts: 1,025
Liked 44 Times on 41 Posts
Likes Given: 61

Default

Oxiclean and no scratch sponge.

Sent from my SGH-T769 using Home Brew mobile app

__________________

Co2 Taps: xmas ale (for july), Cider, Belgium Strong Ale, kolsch
Nitro Tap: Stout
Fermenting: Saison, Red Ale, ESB, brett infected, Pale Ale
Next to Brew: ESB (again)

theck is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY Bucket Fermenters Tkelly32 DIY Projects 1 03-31-2012 11:54 AM
Tight lids on your bucket fermenters? ChshreCat Equipment/Sanitation 8 01-30-2011 08:33 PM
Cleaning EXTERIOR of glass Fermenters? thebigo Equipment/Sanitation 8 12-15-2009 01:59 PM
Cleaning Non-Cut Sanke Fermenters Cape Brewing Equipment/Sanitation 10 09-28-2009 04:55 PM
Cleaning Fermenters sharp63 Equipment/Sanitation 8 09-15-2009 03:29 PM