New Giveaway - Wort Monster Conical Fermenter!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Christmas was good to me-2 New Pumps




Reply
 
LinkBack Thread Tools Display Modes
Old 12-31-2012, 12:29 PM   #1
skawars1
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: Oakland, California
Posts: 65
Liked 2 Times on 2 Posts
Likes Given: 1

Default Christmas was good to me-2 New Pumps

I'm not sure what I did to deserve two pumps but both my in laws and my parents were on the same page. 2 brad new ss inline chuggers were under the tree.

My brewing setup comprises of an old die lift that I put my mash tun on to raise and lower for gravity draining. Two burners are set on a modified heavy steel shop cart and a plate chiller.

Since I normally batch sparge I cant think of a reason to keep both of them.

Anyone out there have any ideas or reasons why I should keep them both?

I'm toying with the thought of returning one and getting a hoprocket or one of the jaybird false bottoms.


B





__________________
skawars1 is offline
 
Reply With Quote Quick reply to this message
Old 12-31-2012, 11:22 PM   #2
SavoryChef
HBT_SUPPORTER.png
Feedback Score: 7 reviews
 
SavoryChef's Avatar
Recipes 
 
Join Date: Feb 2012
Location: Sparks, NV
Posts: 680
Liked 65 Times on 49 Posts
Likes Given: 19

Default

If you use gravity for HLT I see no reason for two pumps. Unless you change your stand to single tier layer in life. Keep one for a spare.



__________________

My Cellar http://www.cellarhq.com/cellar/Savorychef

Untappd: Savorychef

SavoryChef is offline
 
Reply With Quote Quick reply to this message
Old 12-31-2012, 11:32 PM   #3
archer75
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2007
Location: Gresham, Oregon
Posts: 134
Liked 1 Times on 1 Posts
Likes Given: 1

Default

I use gravity for the HLT. One pump for mash tun recirc and pump to boil kettle. Another for the boil kettle to run it through the hop rocket and plate chiller and then to the carboy.

__________________
archer75 is offline
 
Reply With Quote Quick reply to this message
Old 12-31-2012, 11:35 PM   #4
skawars1
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: Oakland, California
Posts: 65
Liked 2 Times on 2 Posts
Likes Given: 1

Default

Quote:
Originally Posted by archer75 View Post
I use gravity for the HLT. One pump for mash tun recirc and pump to boil kettle. Another for the boil kettle to run it through the hop rocket and plate chiller and then to the carboy.
Couldn't you use one pump for that? They are not running at the same time.
__________________
skawars1 is offline
 
Reply With Quote Quick reply to this message
Old 12-31-2012, 11:45 PM   #5
archer75
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2007
Location: Gresham, Oregon
Posts: 134
Liked 1 Times on 1 Posts
Likes Given: 1

Default

Quote:
Originally Posted by skawars1 View Post
Couldn't you use one pump for that? They are not running at the same time.
Comes down to sterilization. Which is why I like separate pumps. I could recirc some hot wort after boil through the pump/kettle to sterilize it and then reroute it through the hop rocket and plate chiller then to the carboy. But then after the recirc through the mash tun and pump to the boil kettle, well that's a lot of hooking up and disconnecting with a bunch of lines. Even with an army of quick disconnects.
I'd just rather have two pumps.
__________________
archer75 is offline
 
Reply With Quote Quick reply to this message
Old 01-02-2013, 12:03 PM   #6
skawars1
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: Oakland, California
Posts: 65
Liked 2 Times on 2 Posts
Likes Given: 1

Default

Quote:
Originally Posted by archer75 View Post
Comes down to sterilization. Which is why I like separate pumps. I could recirc some hot wort after boil through the pump/kettle to sterilize it and then reroute it through the hop rocket and plate chiller then to the carboy. But then after the recirc through the mash tun and pump to the boil kettle, well that's a lot of hooking up and disconnecting with a bunch of lines. Even with an army of quick disconnects.
I'd just rather have two pumps.
Hmmm. I get it now. For now I can't see a reason to keep it. Leaning twords returning one and getting a hop rocket.

Thanks for the responses.


__________________
skawars1 is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help with wiring a 120v 1500w element control pumps with 2 pumps fusa Electric Brewing 19 08-14-2013 01:17 AM
First taste of Christmas Ale....not so good... mthelm85 Recipes/Ingredients 19 11-23-2012 12:29 AM
Good Christmas Reaver Wine Making Forum 6 01-04-2011 02:50 AM
good ebay deal on Little Giant 3-MD-HC pumps Walker Equipment/Sanitation 53 01-31-2010 01:25 AM
Anyone got a good Christmas Ale? Somerville Recipes/Ingredients 11 08-11-2005 04:24 PM