Electric Brewing Supply 30A BCS Giveaway!


Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Chill Wizard Inspired Pump/Chiller Station
Reply
 
LinkBack Thread Tools
Old 04-30-2013, 12:41 AM   #11
headfullahops
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Location: Waterford, Michigan
Posts: 294
Liked 12 Times on 10 Posts
Likes Given: 10

Default

Quote:
Originally Posted by Esmitee
I didn't mean to imply that your build was cheap.
I was focused on your design of the stand !

BTW. your PVC and plumbing work, are perfect looking. Did you even glue the PVC, Cause it's so perfect, it don't look like ya did.
No worries; I didn't take it like that. I bet the stand its self and related hardware didn't cost more than $20. As far as the PVC build goes, the best investment I made was a pair of ratcheting PVC cutters; clean, straight, and accurate cutting of the pipe. It is glued together, but where you usually see purple cement around the joint, I used a cement that was clear and was pretty careful about how I applied it. That 3/4" schedule 40 is really solid once it's glued up.

Cheers!
__________________
headfullahops is offline
 
Reply With Quote Quick reply to this message
Old 05-02-2013, 03:03 PM   #12
churdbird
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Location: Blacklick, OH
Posts: 82
Default

Nice job!

__________________

Hey, Not bad for a twist off!!

churdbird is offline
 
Reply With Quote Quick reply to this message
Old 05-02-2013, 03:15 PM   #13
headfullahops
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Location: Waterford, Michigan
Posts: 294
Liked 12 Times on 10 Posts
Likes Given: 10

Default

Quote:
Originally Posted by churdbird View Post
Nice job!
Thanks a lot! I'm hoping I'll have time to strip it down and paint the PVC and wood pieces tomorrow and have it back together before I brew Saturday.

OFF TOPIC: I just got a Blingmann Hop Rocket delivered from Northern Brewer yesterday and the 4 pounds of leaf hops I ordered from Label Peelers just came literally 2 minutes ago.

I'll post some pics of my setup in action this weekend.

Cheers!
__________________
headfullahops is offline
 
Reply With Quote Quick reply to this message
Old 05-06-2013, 06:18 AM   #14
headfullahops
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Location: Waterford, Michigan
Posts: 294
Liked 12 Times on 10 Posts
Likes Given: 10

Default

Well, didn't get around to painting the stand, but got some shots in action this past brew day.

Also excited to see what difference the Hop Rocket makes on my all Centennial IPA I am transferring here!

image-1149116889.jpg   image-3968231793.jpg   image-407976409.jpg   image-2752000338.jpg  
__________________
headfullahops is offline
TBaGZ Likes This 
Reply With Quote Quick reply to this message
Old 06-25-2013, 12:49 AM   #15
jvanwest
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2010
Location: Chandler, AZ
Posts: 57
Likes Given: 11

Default

do you have a drawing or schematic on what you built or was this eyeballed? I'd like to do something similar with my pump and plate chiller.

__________________

Jerry van West
Chandler, AZ

Member of Arizona Society of Homebrewers (ASH)
Member of Brewer's Association

jvanwest is offline
 
Reply With Quote Quick reply to this message
Old 06-27-2013, 02:41 PM   #16
headfullahops
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Location: Waterford, Michigan
Posts: 294
Liked 12 Times on 10 Posts
Likes Given: 10

Default

Quote:
Originally Posted by jvanwest View Post
do you have a drawing or schematic on what you built or was this eyeballed? I'd like to do something similar with my pump and plate chiller.
I drew up my own plans from the spec'd dimensions of the pump and chiller.
__________________
headfullahops is offline
mrklueber Likes This 
Reply With Quote Quick reply to this message
Old 07-02-2013, 09:16 PM   #17
lowpotential
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2010
Location: San Francisco, CA
Posts: 6
Default

Just wondering if you are using the hop rocket before or after the plate chiller? Seems to make sense before the chiller, but then heat on the hops would be higher. Could aid in filtering the wort however. Couldn't tell from the images.

Great setup. Maybe my next purchase.

__________________
lowpotential is offline
 
Reply With Quote Quick reply to this message
Old 07-02-2013, 09:27 PM   #18
lowpotential
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2010
Location: San Francisco, CA
Posts: 6
Default

Also, are you using the same port for oxygen as for the temp probe? If not, is there an oxygen stone or some other part you ordered to make that work?

__________________
lowpotential is offline
 
Reply With Quote Quick reply to this message
Old 07-03-2013, 06:37 PM   #19
kgalle
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: SEPA, PA
Posts: 240
Liked 4 Times on 4 Posts
Likes Given: 1

Default

Quote:
Originally Posted by lowpotential View Post
Also, are you using the same port for oxygen as for the temp probe? If not, is there an oxygen stone or some other part you ordered to make that work?
Will you post a shopping list for this? Maybe some photos of it being assembled?

Thanks,
KG
__________________
kgalle is offline
 
Reply With Quote Quick reply to this message
Old 07-03-2013, 09:07 PM   #20
mrklueber
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2012
Location: Xenia, Ohio
Posts: 129
Liked 5 Times on 5 Posts
Likes Given: 46

Default

Great job. I switched from an IC to a plate chiller around the first of the year. I built a stand for chill wizard knockoff but I didn't incorporate the O2 stone like you did. Here is my version (I like yours better.)

2013-01-12_0001.jpg  
__________________
mrklueber is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale - Sabco Chill Wizard RonRock For Sale 8 04-29-2013 11:56 PM
California want to buy chill wizard Chadopolis For Sale 1 03-19-2013 06:06 PM
California Sabco Chill-Wizard tm6030 For Sale 2 02-16-2013 01:27 AM
Another Milling Station (inspired by John Beere's) 3 Dog Brew DIY Projects 16 09-17-2010 05:35 PM
Wort Wizard/Venturi Pump w/ Immersion Chiller? jimbus All Grain & Partial Mash Brewing 1 07-28-2010 03:23 AM