*Ss Brewing Technologies Giveaway - Enter Now!*

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Calibrating Blichmann Brewmometers
Reply
 
LinkBack Thread Tools
Old 04-08-2012, 07:20 PM   #1
IPAfreek
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2011
Location: Chesapeake, Virginia
Posts: 38
Default Calibrating Blichmann Brewmometers

Got a 15 Gal Boilermaker a few weeks ago, and to my understanding there was supposed to be a calibration procedure outlined in the box, but it didnt come with one. Anyone know anything about this? My thermometer is about 18 degrees on the cold side Cheers!

__________________
"I be brewin!"- The guy that just posted.
IPAfreek is offline
 
Reply With Quote Quick reply to this message
Old 04-08-2012, 10:28 PM   #2
eastoak
Senior Member
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: oakland, california
Posts: 3,224
Liked 149 Times on 140 Posts
Likes Given: 83

Default

i think there is a nut head on the back that turns the face or the dial but mine has never gone off of calibration so i can't remember.

__________________
eastoak is online now
 
Reply With Quote Quick reply to this message
Old 04-09-2012, 01:36 AM   #3
itsme6582
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: Cleveland
Posts: 813
Liked 22 Times on 20 Posts
Likes Given: 23

Default

How precise do you want to go? If you want simple, stick the thermo in boiling water and adjust the screw to 212.

If you have a thermo for a chiller, you may want to calibrate to 32 because 70 is closer to freezing than boiling. Stick it in ice water and adjust the screw.

The next step for precision is to find your altitude and then use a calculator like this to find your boiling temp. You can get your altitude from your city's Wiki page and possibly your specific house from google maps.
http://www.csgnetwork.com/h2oboilcalc.html

I have all of my thermos calibrated to boiling at a hair below 211 because I'm about 700 ft above sea level.

If you want super precision, you'll need your altitude, a good barometer reading, some graph paper, and both boiling water and ice water.

__________________
itsme6582 is offline
 
Reply With Quote Quick reply to this message
Old 04-10-2012, 01:37 AM   #4
IPAfreek
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2011
Location: Chesapeake, Virginia
Posts: 38
Default

apreciate the good info! yea i saw the screw on the back of the thermometer head after i posted, got it going. And luckily where I'm at here in VA we are about 10 feet above sea level, so I should be pretty good on my acuracy. Thanks again

__________________
"I be brewin!"- The guy that just posted.
IPAfreek is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Calibrating hydrometer question damdaman Equipment/Sanitation 10 01-26-2011 07:53 PM
Calibrating brew pot... tireater Equipment/Sanitation 15 04-26-2009 07:56 AM
calibrating my keggle DrugCoder Equipment/Sanitation 4 01-24-2009 10:26 PM
Calibrating a digital thermometer shertz Equipment/Sanitation 1 01-19-2009 03:31 PM
Calibrating bimetallic thermometers AiredAle Equipment/Sanitation 4 01-16-2008 12:10 AM