Spike Brewing 12.5 Conical Fermenter Giveaway!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > BTUs for Pot Size

Reply
 
LinkBack Thread Tools
Old 01-23-2013, 01:40 AM   #1
Albertastorm
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 26
Likes Given: 2

Default BTUs for Pot Size

Is the 66000 BTU burner from Costco big enough for a 55 gallon Blichmann Pot?

__________________
Albertastorm is offline
 
Reply With Quote Quick reply to this message
Old 01-23-2013, 01:57 AM   #2
SpikeBrewing
Vendor
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 0 reviews
 
SpikeBrewing's Avatar
Recipes 
 
Join Date: Jul 2011
Location: Milwaukee, WI
Posts: 762
Liked 51 Times on 46 Posts
Likes Given: 53

Default

Do you need it to get to boil? It probably will but will take awhile. If you only need to get to 170ish then you should be fine but again it will take a bit of time.

__________________
SpikeBrewing is offline
 
Reply With Quote Quick reply to this message
Old 01-23-2013, 02:14 AM   #3
Albertastorm
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 26
Likes Given: 2

Default

Tue Jan 22, 2013 8:14 pm
Re: BTU Burner for size of HLT
So here's what I'm thinking.

1 BTU heats 1 pound of water 1 Degree

I have 550 pounds of water that I need to heat from 40 degrees F to 208'Degrees F
Water boils at 208 degrees F at my elevation.

168 Degrees X 550 pounds= 92400 BTUs

So if my burner (66000 BTUs) runs for 1.5 hours I should have boiling water......but wait....how efficient is my pot...well if Blichmann pots are as good as they are expensive I should get to boiling by farting near the pot.

Some how I don't think that will happen...so lets say I get 50 percent of the heat in the water...is it really going to take three hour to boil my water?????

__________________
Albertastorm is offline
 
Reply With Quote Quick reply to this message
Old 01-23-2013, 02:25 AM   #4
annasdadhockey
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Kingston, PA
Posts: 1,814
Liked 41 Times on 35 Posts
Likes Given: 36

Default

At some point, the heat gained will equal the heat lost. At 66000 BTU, this may happen before reaching 208 degrees. I have a 185000 btu burner, and for my 52 gallons, it takes me a good 90 minutes to go from 150ish to boiling, and its not even a real vigorous boil. I don't think 66000 BTUs will get you there. I hope I am wrong though.

__________________
Anybody can be a rockstar when the rest of the room is wearing helmets and drooling on themselves.

Quote:
Originally Posted by dfc View Post
Things are going great too. I think I've only punched her in the face 3 times!
FERMENTING: Heady Topper Clone?
CONDITIONING: 40 gallons KBS clone in a Jim Beam Barrel (since 11/24/12)
DRINKING: Smoked Robust Porter, Orange Coriander Pale Ale #5
THINKING: first foray into lagers?
annasdadhockey is offline
 
Reply With Quote Quick reply to this message
Old 01-23-2013, 02:36 AM   #5
Albertastorm
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 26
Likes Given: 2

Default

Quote:
Originally Posted by annasdadhockey View Post
At some point, the heat gained will equal the heat lost. At 66000 BTU, this may happen before reaching 208 degrees. I have a 185000 btu burner, and for my 52 gallons, it takes me a good 90 minutes to go from 150ish to boiling, and its not even a real vigorous boil. I don't think 66000 BTUs will get you there. I hope I am wrong though.
Wow at that rate I will have to fire up the burner on Wednesday to brew on Sunday!

I am thinking.....I do that sometimes...apparently twice in one thread.....that a burner putting out 185000 BTUs is so crazy that 90 percent of that heat must be going around that pot and not heating the water....do the math...1BTU heats one pound of water 1 degree.

You should be raising that water temp 335 degrees in one hour.

Your raising it 40 degrees per hour......15 percent efficient!
__________________
Albertastorm is offline
 
Reply With Quote Quick reply to this message
Old 01-23-2013, 02:39 AM   #6
Albertastorm
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 26
Likes Given: 2

Default

Quote:
Originally Posted by annasdadhockey View Post
At some point, the heat gained will equal the heat lost. At 66000 BTU, this may happen before reaching 208 degrees. I have a 185000 btu burner, and for my 52 gallons, it takes me a good 90 minutes to go from 150ish to boiling, and its not even a real vigorous boil. I don't think 66000 BTUs will get you there. I hope I am wrong though.
Yes...heat gained equals heat lost at boil!
__________________
Albertastorm is offline
 
Reply With Quote Quick reply to this message
Old 01-23-2013, 02:46 AM   #7
annasdadhockey
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Kingston, PA
Posts: 1,814
Liked 41 Times on 35 Posts
Likes Given: 36

Default

Quote:
Originally Posted by Albertastorm View Post
....do the math...1BTU heats one pound of water 1 degree.

You should be raising that water temp 335 degrees in one hour.
In a perfect world, yes. However, there is abundant heat loss through the sides of the kettle. If I could trap all of the heat I put into it, then yes, it would boil quicker. When you lose that much heat through the sides of the kettle, it takes a lot longer. I'm just telling you my experience. Take it for what it's worth.
__________________
Anybody can be a rockstar when the rest of the room is wearing helmets and drooling on themselves.

Quote:
Originally Posted by dfc View Post
Things are going great too. I think I've only punched her in the face 3 times!
FERMENTING: Heady Topper Clone?
CONDITIONING: 40 gallons KBS clone in a Jim Beam Barrel (since 11/24/12)
DRINKING: Smoked Robust Porter, Orange Coriander Pale Ale #5
THINKING: first foray into lagers?
annasdadhockey is offline
 
Reply With Quote Quick reply to this message
Old 01-23-2013, 02:48 AM   #8
annasdadhockey
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Kingston, PA
Posts: 1,814
Liked 41 Times on 35 Posts
Likes Given: 36

Default

Quote:
Originally Posted by Albertastorm View Post
Yes...heat gained equals heat lost at boil!
Not quite.

Hold a Bic Lighter under a 55 gallon kettle, then tell me that heat gained equals heat loss only at boil. without sufficient BTU's, you won't get to a boil because of the amount of heat loss.
__________________
Anybody can be a rockstar when the rest of the room is wearing helmets and drooling on themselves.

Quote:
Originally Posted by dfc View Post
Things are going great too. I think I've only punched her in the face 3 times!
FERMENTING: Heady Topper Clone?
CONDITIONING: 40 gallons KBS clone in a Jim Beam Barrel (since 11/24/12)
DRINKING: Smoked Robust Porter, Orange Coriander Pale Ale #5
THINKING: first foray into lagers?
annasdadhockey is offline
 
Reply With Quote Quick reply to this message
Old 01-23-2013, 02:54 AM   #9
bbrim
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2008
Location: Lincoln, Nebraska
Posts: 742
Liked 25 Times on 23 Posts
Likes Given: 3

Default

Man... I have a 200,000 BTU burner for my 15 gallon kettle. There is very little wait time coming up to a boil. You're going to lose energy, go big and save yourself a lot of headaches.

__________________
bbrim is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
How many BTUs should I get? CircleC-Brewer Equipment/Sanitation 8 03-20-2014 04:15 PM
How many BTUs do I need? Barnstormer Equipment/Sanitation 3 11-16-2011 06:04 PM
2 x 10,000 btus enough? ezzieyguywuf Equipment/Sanitation 13 02-21-2011 02:19 AM
BTUs dataz722 Equipment/Sanitation 22 10-23-2007 02:57 AM
how many BTUs? Monk Equipment/Sanitation 2 06-27-2006 01:44 AM