*Ss Brewing Technologies Giveaway - Enter Now!*

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Brewhemoth conicals?
Reply
 
LinkBack Thread Tools
Old 06-03-2011, 10:21 AM   #291
DaleP
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2010
Location: Webster Groves, Missouri
Posts: 143
Liked 9 Times on 9 Posts
Likes Given: 7

Default

They can be ordered with adjustable legs, which will become standard as our old stock runs out, so the height can be lowered.
I would not advise casters, filled it is heavy, and we make no garentees with after market changes.

__________________
DaleP is offline
 
Reply With Quote Quick reply to this message
Old 06-03-2011, 01:13 PM   #292
Celticway
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2011
Location: Lawrenceville, GA, GA
Posts: 340
Liked 5 Times on 5 Posts

Default

Are there any concerns with the weight when putting the fermenter in the fridge? Those of you who put thier Brewhemoth in the fridge do you add some sort of plate to the bottom of the fridge so the legs don't bust through the bottom?

__________________
Celticway is offline
 
Reply With Quote Quick reply to this message
Old 06-03-2011, 06:39 PM   #293
BigJerk
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: Seattle, Lynnwood, WA
Posts: 332
Liked 1 Times on 1 Posts
Likes Given: 1

Default

Good to know, the castors were only a thought. I just ordered my valves and such this morning, so with any luck I can put a brew in it next weekend!

__________________
BigJerk is offline
 
Reply With Quote Quick reply to this message
Old 06-03-2011, 06:56 PM   #294
BrewBeemer
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2006
Location: island, inside an atoll
Posts: 3,505
Liked 20 Times on 20 Posts
Likes Given: 7

Default

Quote:
Originally Posted by BigJerk View Post
Good to know, the castors were only a thought. I just ordered my valves and such this morning, so with any luck I can put a brew in it next weekend!
What's wrong with making a piano moving style frame with humps for the casters, keeping the ferm legs down low to the ground plus secured to the frame at each leg?
No single leg pulled or strained, able to roll around plus the same height as original after removing the levelers installing a bolt thru the castered frame upwards.
__________________

Bier Jagdwaffe... Bier 30 zeit.....~~=o&o>..........

BrewBeemer is offline
 
Reply With Quote Quick reply to this message
Old 06-03-2011, 08:25 PM   #295
BigJerk
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: Seattle, Lynnwood, WA
Posts: 332
Liked 1 Times on 1 Posts
Likes Given: 1

Default

I will probably confine it to a fridge when I get a house. The casters were just a thought for rolling it around the apt when guests visit and I'm forced to hide my beauty. There are a number of things I could do to reinforce the legs (weld x frame supports in, etc) but I don't wanna put too much strain on the bolts and break it outta the gate, so I'll just let it be (for now)

__________________
BigJerk is offline
 
Reply With Quote Quick reply to this message
Old 06-04-2011, 12:23 AM   #296
RiverCityBrewer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: Cincinnati, OH
Posts: 766
Liked 26 Times on 23 Posts
Likes Given: 2

Default

Quote:
Originally Posted by Celticway View Post
Are there any concerns with the weight when putting the fermenter in the fridge? Those of you who put thier Brewhemoth in the fridge do you add some sort of plate to the bottom of the fridge so the legs don't bust through the bottom?
Mine is in an upright freezer and has been for the past few months... don't have anything on the floor of the freezer and haven't had any problems thus far.
__________________
RiverCityBrewer is offline
 
Reply With Quote Quick reply to this message
Old 06-04-2011, 12:50 AM   #297
JohnTheBrewist
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2010
Location: SoCal
Posts: 620
Liked 8 Times on 7 Posts
Likes Given: 6

Default

Quote:
Originally Posted by BrewBeemer View Post
What's wrong with making a piano moving style frame with humps for the casters, keeping the ferm legs down low to the ground plus secured to the frame at each leg?
No single leg pulled or strained, able to roll around plus the same height as original after removing the levelers installing a bolt thru the castered frame upwards.
I agree. The nuts holding the original levelers aren't much better than tack welded on, so I can see why Dale would recommend against casters with the legs as is. But a bolt on triangular dolly should work just fine and is what I'll be doing.
__________________

Somewhere between
your liver and spleen
its always clear
for one more beer!

JohnTheBrewist is offline
 
Reply With Quote Quick reply to this message
Old 06-04-2011, 01:43 AM   #298
BrewBeemer
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2006
Location: island, inside an atoll
Posts: 3,505
Liked 20 Times on 20 Posts
Likes Given: 7

Default

Quote:
Originally Posted by JohnTheBrewist View Post
I agree. The nuts holding the original levelers aren't much better than tack welded on, so I can see why Dale would recommend against casters with the legs as is. But a bolt on triangular dolly should work just fine and is what I'll be doing.
Which version do you have with how were the legs attached?

I call the first ferms as series one having SS angle welded in three locations up the side of the ferm body starting at the cone to body transition on up two more welds. This as six welds each angle SS leg.
Series two legs welded at one location only at the cone to body transition.
I fear this will flex and fail if not treated carefully.
Series three looks like studs welded up or spot welded to the body sides with square tube and acorn nuts.
Series three should you yank the legs a bunch I bet the welded (spot?) studs will eventually fatigue the body metal and cause a crack, tear and a failure just my thinking.
Faster with less labor for increased production how I see it.
Bottom line the strongest leg ferms look to be JMO the "Series" one having six welds at each SS angle material leg. I also have a series one Brewhemoth.
I bet your not too far away from Muroc Dry lake as well El Mirage Dry lake with the LSR runs which begin June 12th?
__________________

Bier Jagdwaffe... Bier 30 zeit.....~~=o&o>..........

BrewBeemer is offline
 
Reply With Quote Quick reply to this message
Old 06-04-2011, 03:10 AM   #299
JohnTheBrewist
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2010
Location: SoCal
Posts: 620
Liked 8 Times on 7 Posts
Likes Given: 6

Default

I have a series 3 brewhemoth. The studs are tig welded on and seem pretty solid, but the legs are just mild steel C-channel with a nut welded on the bottom. I'm not confident in the strength of the nuts on the bottom, especially if you wanted to screw in a caster.

I'm in the low desert, but still a couple hours away from the dry lakes. Haven't gone to the LSR trials yet, but its on my list.

__________________

Somewhere between
your liver and spleen
its always clear
for one more beer!

JohnTheBrewist is offline
 
Reply With Quote Quick reply to this message
Old 06-04-2011, 03:47 AM   #300
BrewBeemer
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2006
Location: island, inside an atoll
Posts: 3,505
Liked 20 Times on 20 Posts
Likes Given: 7

Default

Damn bro you got to go to speed week at Bonneville, motorhome the best way.
It's in the family blood dad in the 40's, myself and my son all gearheads and racers.

Now the series thing name I made up typing earlier, I may have tagged a wrong version vs Dale or Josh would call them.
I have plans for my ferm to be modified to my liking and features.

__________________

Bier Jagdwaffe... Bier 30 zeit.....~~=o&o>..........

BrewBeemer is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
MoreBeer Conicals zymurgy101 Equipment/Sanitation 13 07-04-2011 05:49 PM
Chinese conicals Styles Equipment/Sanitation 23 09-28-2009 01:49 AM
Usage of conicals billtzk Equipment/Sanitation 19 11-27-2008 02:25 AM
Conicals Kayos Equipment/Sanitation 10 02-07-2008 07:31 PM
Using conicals- MikeFlynn74 Equipment/Sanitation 6 12-01-2007 10:36 AM