Happy HolidaySs Giveaway - Last Sponsor Giveaway of the Year!

Come Enter the BrewDeals/FastFerment Giveaway!


Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Blichmann Burner Problems
Reply
 
LinkBack Thread Tools
Old 06-17-2013, 11:12 PM   #1
TommyTbar
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2012
Location: Lansing, MI
Posts: 106
Liked 19 Times on 13 Posts
Likes Given: 9

Default Blichmann Burner Problems

Hey recently bought two blichmann burners, both are having the same problem
, both seem like there not getting enough air, on both the intakes have to be fully open to get a blue flame i have blown both out with an air compressor cant see any blockage, followed the instructions even watched the blichmann video on youtube, if i try and close the air intake no matter what the gas setting is it gives me huge orange flames, should i contact them? or is there something i am missing here

any help would be awesome, i have used these before with great results, but finally got around to buying one for myself, they are just way too expensive to have any issues

__________________

"There's something inherrently pleasing to me about using flowers rather than green rabbit turds."

TommyTbar is offline
 
Reply With Quote Quick reply to this message
Old 06-17-2013, 11:19 PM   #2
day_trippr
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Stow, MA
Posts: 11,027
Liked 1353 Times on 1095 Posts

Default

Are you using the original gas orifice and regulator with each of these burners?
What is your gas source?

Cheers!

__________________
day_trippr is offline
 
Reply With Quote Quick reply to this message
Old 06-17-2013, 11:24 PM   #3
TommyTbar
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2012
Location: Lansing, MI
Posts: 106
Liked 19 Times on 13 Posts
Likes Given: 9

Default

Quote:
Originally Posted by day_trippr View Post
Are you using the original gas orifice and regulator with each of these burners?
What is your gas source?

Cheers!
yeah the regulators that came with them, propane tanks
__________________

"There's something inherrently pleasing to me about using flowers rather than green rabbit turds."

TommyTbar is offline
 
Reply With Quote Quick reply to this message
Old 06-18-2013, 01:32 AM   #4
VladOfTrub
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2011
Location: , Pa
Posts: 610
Liked 119 Times on 87 Posts
Likes Given: 158

Default

If you have a blue flame with the shutters open. Why are you closing them? Starve the burner of air, you will get a sooty, yellow flame.

__________________
VladOfTrub is offline
 
Reply With Quote Quick reply to this message
Old 06-18-2013, 02:09 AM   #5
TommyTbar
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2012
Location: Lansing, MI
Posts: 106
Liked 19 Times on 13 Posts
Likes Given: 9

Default

Quote:
Originally Posted by VladOfTrub View Post
If you have a blue flame with the shutters open. Why are you closing them? Starve the burner of air, you will get a sooty, yellow flame.
i am not fully closing them the problem is that i have to have them fully open to achive a blue flame, my buddies you only have to have open maybe 1/4 turn and that is what blichmann recommends. Having to leave them open all the way is not allowing me to fine tune the burner... its all or nothing basically
__________________

"There's something inherrently pleasing to me about using flowers rather than green rabbit turds."

TommyTbar is offline
 
Reply With Quote Quick reply to this message
Old 06-18-2013, 05:06 AM   #6
day_trippr
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Stow, MA
Posts: 11,027
Liked 1353 Times on 1095 Posts

Default

Is it possible you are tripping the ACME valve in the regulator? Are you starting the whole thing off with the regulator fully closed before slowly opening the tank valve, then slowly opening the regulator?

fwiw, I've been using a pair of Blichmann burners on propane with the factory regulators for years. Both my BK burner and HLT burners have their air dampers set to 50% open. I can't remember the last time I fiddled with either of them...

Cheers!

__________________
day_trippr is offline
 
Reply With Quote Quick reply to this message
Old 06-18-2013, 01:52 PM   #7
Barnesie
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2010
Location: Fairfax, Virginia
Posts: 360
Liked 64 Times on 34 Posts
Likes Given: 10

Default

The burners are simple, so it's probably an issue of how you're adjusting your propane. Are you adjusting the regulator, burner and orifice all at the same time?

I'd give it lots of gas at the regulator (not the tank, just go ahead and open that), open that to a trickle at the burner and then start closing your orifice a bit from wide open. If it starves, try giving it more gas at the burner and see if you can get blue tips. Short blue tips are hotter then you'd think, you don't need 2" of flame jumping out of the burner.

Just work the orifice and the burner valve until you get a happy medium. As said above, once you set it you can Ronco forget it.

__________________
BrewDC Blog BrewDC Twitter
Primary: Unnamed Stout, unnamed Belgian Blonde
Secondary: Ogre Barleywine, Oak aged Belgian Tripel
Bottles: none
Keg: Junkyard IPA, Alagash Belgian Tripel clone

Beware: Everyone is an expert on the internet.
Barnesie is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Blichmann Burner Shepherd5 Equipment/Sanitation 32 09-12-2013 05:31 AM
Georgia Blichmann Burner & More Aspenextreme For Sale 3 06-10-2013 02:02 PM
For Sale - Blichmann Burner legs, Blichmann thrumometer chezhed For Sale 1 09-05-2012 02:26 AM
Does a Natural gas burner pose the same problems a Propane burner poses? Endovelico Equipment/Sanitation 15 01-28-2011 05:48 PM
Blichmann Brewmometer Problems BillyBroas Equipment/Sanitation 5 07-20-2010 10:57 PM



Newest Threads

LATEST SPONSOR DEALS