Happy HolidaySs Giveaway - Winners Re-Re-Re-Re-Drawn - 24 hours to Claim!

Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Blichmann boilermaker questions
Reply
 
LinkBack Thread Tools
Old 02-05-2012, 04:40 PM   #1
brewman63
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Posts: 15
Default Blichmann boilermaker questions

I've just brewed my first full wort boil with a 20 gal Boilermaker I just recently purchased. Everything seemed to go well but I have a couple of questions. One is the heat shield. I tried positioning it to protect the thermometer but couldn't get it situated where it sits on the burner correctly. I'm using the Blichmann Top Tier burner with the leg extensions. The Edge of the 20 gal pot seems to sit far enough away from the heat source that the shield wouldn't be necessary. Now I only did a 5 gal batch (boiled about 7.5 gals) so I didn't have to have the flame real high. I guess when it comes time to doing a 10 gal batch I'll have to figure something out with the heat shield. Does anybody use the heat shield with the Top Tier burner and how do you have it situated?

My second question relates to the valve on the pot. I just drained the boiled wort out of the pot using the valve into my fermentation bucket. It created a little too much aeration for my liking. I see Blichmann has Quick Connect fittings for the valve in different sizes and configurations. Would I use this connector and connect it to some tubing to drain the wort into the fermenter? Or am I better off siphoning it? That seems a little silly considering the pot has this built-in valve that I'd like to take advantage of. I've been brewing for about 15 years now but this is the first time I've ever used a pot with a valve.

Thanks.

__________________
brewman63 is offline
 
Reply With Quote Quick reply to this message
Old 02-05-2012, 04:46 PM   #2
Deuce
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: Providence Village, Texas
Posts: 1,543
Liked 18 Times on 17 Posts
Likes Given: 1

Default

I don't use my heat shield. All it would prevent is water boiling in the sight glass.

Just buy a 1/2" barb and screw it onto your valve. Then slide in tubing and drain.

__________________
Diverse Haus Brewery
Deuce is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools




Newest Threads

LATEST SPONSOR DEALS