Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Equipment/Sanitation (http://www.homebrewtalk.com/f11/)
-   -   Anyone running the Tower of Power? (http://www.homebrewtalk.com/f11/anyone-running-tower-power-341594/)

morgan43 07-18-2012 04:45 PM

1 Attachment(s)

I like the ability to move the tower.


morgan43 07-18-2012 06:46 PM

5 Attachment(s)

Here are some pics.


morgan43 07-18-2012 06:46 PM

5 Attachment(s)

Here are some pics.


morgan43 07-18-2012 06:46 PM

5 Attachment(s)

Here are some pics.


morgan43 07-18-2012 06:46 PM

5 Attachment(s)

Here are some pics.


morgan43 07-18-2012 06:46 PM

5 Attachment(s)

Here are some pics.


gwfrankpsu 07-21-2012 04:53 PM

2 Attachment(s)

I got my QD fittings from www.barganfittings.com. Get the stainless steel, not the cheaper plated. System works well with the "T" on the mash tun. The HLT is off during mash allowing wort to recirculate through the AutoSparge valve. When the mash is done I move the handle to the right (see hose without an end) into the brew kettle and open the valve on the HLT. Very little mess, if you remember to use the valves properly.

Still trying to work out the computer interface for step mash.

The tower is usually a foot or more away from the Mash Tun, just to keep heat away from the controller.


gwfrankpsu 07-21-2012 04:53 PM

2 Attachment(s)

I got my QD fittings from www.barganfittings.com. Get the stainless steel, not the cheaper plated. System works well with the "T" on the mash tun. The HLT is off during mash allowing wort to recirculate through the AutoSparge valve. When the mash is done I move the handle to the right (see hose without an end) into the brew kettle and open the valve on the HLT. Very little mess, if you remember to use the valves properly.

Still trying to work out the computer interface for step mash.

The tower is usually a foot or more away from the Mash Tun, just to keep heat away from the controller.


dermotstratton 07-29-2012 03:22 AM

1 Attachment(s)

When I installed the solenoid valve, the gas line isn't long enough to attach. Did anyone else have this problem?


toddegg 10-01-2012 03:19 AM

My TT/TOP
 
1 Attachment(s)
Quote:
Originally Posted by gjabball View Post
Would love to see pictures and videos of your set up. I am putting together a top tier/ TOP setup too.
Here's a quick pic of my setup (current). I have gone back and forth with having both HLT & MT lower, boil kettle separate, etc. etc. I have two pumps and can easily readjust to whatever configuration I want. I also have a SS HERMS coil in the HLT as I had been doing HERMS before I got the TOP. Will try to video next brew day. Took the TOP for a test with water. Seemed to work very well & programmed with the TOP-Link v2 software was easy enough.


All times are GMT. The time now is 06:20 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.