Spike Brewing 12.5 Conical Fermenter Giveaway!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Another LOVE controller programming thread

Reply
 
LinkBack Thread Tools
Old 02-22-2010, 01:11 AM   #1
illinibrew04
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2007
Posts: 135
Default Another LOVE controller programming thread

I currently have my controller (TSS2-2100) set up for cooling only. I am using it for fermentation. The problem is that I don't want the temp to continue to drift downward after the chest freezer compressor turns off. Here are current settings:

SP2=0
r 2 = 10
SP1=67.0

If I want to ferment at 67 and output one is cool, then how do I make the compressor turn on at say 1.5 deg. hotter than 67 and turn off at 1.0 degree hotter still (SP!+1)so it drifts down? Whatever I have set now is turning on at 68 (SP1+1) and that's fine with me. I would however like to know what this parameter is as well. As usual, thanks for the help.

__________________
illinibrew04 is offline
 
Reply With Quote Quick reply to this message
Old 02-24-2010, 01:45 PM   #2
illinibrew04
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2007
Posts: 135
Default

Quote:
Originally Posted by illinibrew04 View Post
I currently have my controller (TSS2-2100) set up for cooling only. I am using it for fermentation. The problem is that I don't want the temp to continue to drift downward after the chest freezer compressor turns off. Here are current settings:

SP2=0
r 2 = 10
SP1=67.0

If I want to ferment at 67 and output one is cool, then how do I make the compressor turn on at say 1.5 deg. hotter than 67 and turn off at 1.0 degree hotter still (SP!+1)so it drifts down? Whatever I have set now is turning on at 68 (SP1+1) and that's fine with me. I would however like to know what this parameter is as well. As usual, thanks for the help.
OK, so I started playing with this thing and trying to decipher the manual that comes with it. I've answered my own question now, so I figured I'd post my understanding so that if anybody else is wondering this they have the information:

1. This is all assuming that output 1 is cooling and output 2 is heating
2. Operating mode (parameter r8) should be set to "On1"
3. If, as I said, I want the compressor to turn on at 68.5 and off at 68 you have to set SP1 to 68 (the compressor will turn off here) and r1 to .5 (this means it will turn on at SP1+r1, or 68.5)
4. I should also note that r0 should be set to "ind" and c1 to "dir"
5. For heating, set c2 to "inv"
6. SP2 will be the temp. at which you want the heater to turn off
7. r2 will be the number of degrees below SP2 you want the heater to turn on at

Well, that's it...I hope I didn't confuse anyone.

Cheers!
__________________
illinibrew04 is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
LOVE TSS2-2100 Programming help dunleav1 Equipment/Sanitation 18 04-15-2012 11:40 PM
Love controller programming twst1up Equipment/Sanitation 7 01-29-2010 03:26 AM
help with Love TS programming GamePreserve DIY Projects 17 12-24-2009 05:00 PM
Programming TS2 Love Control brewboy5150 DIY Projects 4 11-06-2009 04:09 AM