Happy HolidaySs Giveaway - Last Sponsor Giveaway of the Year!

Come Enter the BrewDeals/FastFerment Giveaway!


Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Advice needed on regulators
Reply
 
LinkBack Thread Tools
Old 03-10-2009, 03:08 AM   #1
noisy123
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2008
Location: Madison, WI
Posts: 587
Liked 1 Times on 1 Posts

Default Advice needed on regulators

I have a broken high pressure gauge on one of these:

and I need to buy another regulator. I plan on using the one with broken gauge above as a rootbeer regulator and one of these:

for my beer. What parts to I need do hook these together? Just a nipple? (giggle)

Thanks much for the help.

__________________
noisy123 is offline
 
Reply With Quote Quick reply to this message
Old 03-10-2009, 03:20 AM   #2
RC0032
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Chicago
Posts: 1,134
Liked 16 Times on 13 Posts
Likes Given: 11

Default

Both of those are primary regulators and wont work together. What you need is a secondary regulator like this -> Beer Regulator - Secondary CO2 Regulator - Classic Series

-or- Beer Regulator - Secondary CO2 Regulator - Classic Series

then use a tube off the primary into the secondary

__________________
RC0032 is offline
 
Reply With Quote Quick reply to this message
Old 03-10-2009, 03:22 AM   #3
noisy123
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2008
Location: Madison, WI
Posts: 587
Liked 1 Times on 1 Posts

Default

Shoot. I was hoping there was an adapter.

__________________
noisy123 is offline
 
Reply With Quote Quick reply to this message
Old 03-10-2009, 03:24 AM   #4
RC0032
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Chicago
Posts: 1,134
Liked 16 Times on 13 Posts
Likes Given: 11

Default

What part of it broke?

(there very well might be an adapter but im unaware of one)

__________________
RC0032 is offline
 
Reply With Quote Quick reply to this message
Old 03-10-2009, 03:33 AM   #5
noisy123
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2008
Location: Madison, WI
Posts: 587
Liked 1 Times on 1 Posts

Default

Just the gauge, it can be replaced. I figured I'd just save the dough and upgrade the primary.

__________________
noisy123 is offline
 
Reply With Quote Quick reply to this message
Old 03-10-2009, 03:48 AM   #6
RC0032
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Chicago
Posts: 1,134
Liked 16 Times on 13 Posts
Likes Given: 11

Default

What gauge? A lot of people do a delete for the volume gauge.

If you want 2 lines take out the single output and replace it with a Y LINK then buy some of these LINK and add a second regulator.

I have some of that stuff left over from my build if you are interested

__________________
RC0032 is offline
 
Reply With Quote Quick reply to this message
Old 03-10-2009, 03:51 AM   #7
jonp9576
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Lansdale, PA
Posts: 1,348
Liked 3 Times on 3 Posts
Likes Given: 1

Default

two primary will work just fine together.

__________________

On Tap:warrior apa
On Tap: crystal light
On Tap:BM's centenial blonde
"Just remember that the real enemy here are those wine drinking pussies."-BierMuncher

jonp9576 is offline
 
Reply With Quote Quick reply to this message
Old 03-10-2009, 03:52 AM   #8
jonp9576
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Lansdale, PA
Posts: 1,348
Liked 3 Times on 3 Posts
Likes Given: 1

Default

take the high pressure gauge out of the broken one, and the gas in nut and nipple off of the other one. put them together with a high pressure 1/4 to 1/4 piece of brass(MAKE SURE ITS RATED HIGH PRESSURE, UP TO 3000 psi

__________________

On Tap:warrior apa
On Tap: crystal light
On Tap:BM's centenial blonde
"Just remember that the real enemy here are those wine drinking pussies."-BierMuncher

jonp9576 is offline
 
Reply With Quote Quick reply to this message
Old 03-10-2009, 04:10 AM   #9
noisy123
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2008
Location: Madison, WI
Posts: 587
Liked 1 Times on 1 Posts

Default

Quote:
Originally Posted by jonp9576 View Post
take the high pressure gauge out of the broken one, and the gas in nut and nipple off of the other one. put them together with a high pressure 1/4 to 1/4 piece of brass(MAKE SURE ITS RATED HIGH PRESSURE, UP TO 3000 psi
Like
this?
They don't give a pressure rating.
__________________
noisy123 is offline
 
Reply With Quote Quick reply to this message
Old 03-10-2009, 09:27 AM   #10
MoRoToRiUm
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2008
Posts: 1,413
Liked 4 Times on 4 Posts

Default

Same link I was going to give eyou after reading this post- should work just fine for you!

__________________
Broken Face Brewery
Est. 2008
MoRoToRiUm is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Advice needed for APA Bosium All Grain & Partial Mash Brewing 3 09-09-2009 07:25 PM
What to do, what to do? Advice needed beergutbrew All Grain & Partial Mash Brewing 6 04-04-2009 02:26 AM
Advice needed Sully_PA Bottling/Kegging 2 11-06-2006 01:28 AM
Advice Needed Noldar Beginners Beer Brewing Forum 8 10-27-2006 09:38 PM
Advice Needed swampdog All Grain & Partial Mash Brewing 4 05-02-2005 10:28 PM



Newest Threads

LATEST SPONSOR DEALS