Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > 35k vs 100k burner problem?
Reply
 
LinkBack Thread Tools
Old 05-16-2013, 12:02 AM   #1
MrZ2U
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Austin (Pville), Texas
Posts: 64
Liked 1 Times on 1 Posts

Default 35k vs 100k burner problem?

I bought one of these cheap from someone bailing out of brewing.

http://www.agrisupply.com/carolina-c...-btus/p/64482/

Previously I had a much taller 35K burner.

I have a new problem. I put it on my deck and fired it up under 7 gallons to see how fast it boils. about 10 minutes into it I start to smell pine and at about 12 minutes I was at 150 and noticed why I smelled pine so I shut it off. It was puilling sap out of my deck, my 7 year old deck.

Obviously I need some insulation material between the burner and deck. Cinderblock caps? Think those will take the heat and protect the deck?

Second problem is the flame comes up around my kettle at full power. Minor issue that I can address with some sheet metal but interested how anyone else may have addressed it ?

__________________

"Nobody knows everything. Nobody even knows everything about any one thing. And most of us don't know much." P. J. O'Orourke

MrZ2U is offline
 
Reply With Quote Quick reply to this message
Old 05-16-2013, 04:22 AM   #2
day_trippr
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Stow, MA
Posts: 10,311
Liked 1228 Times on 994 Posts

Default

I have a bullet smoker that would melt my Trex deck if not for the 20" square paver I set it on. I'm sure the same thing would work for your burner. Come to think of it, I used to set that same paver on top of a Workmate and then set my HLT burner on top of that...

Cheers!

__________________
day_trippr is offline
 
Reply With Quote Quick reply to this message
Old 05-16-2013, 09:44 AM   #3
CastleHollow
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
CastleHollow's Avatar
Recipes 
 
Join Date: Dec 2010
Location: Midlothian, VA
Posts: 659
Liked 97 Times on 70 Posts
Likes Given: 54

Default

Sheet metal should also help with the deck problem: I constructed a heat shield out of some flashing and mounted it below the burner.

__________________
CastleHollow is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Banjo Burner Problem bambrew Equipment/Sanitation 6 04-28-2013 10:20 PM
Problem with Banjo burner baer19d Equipment/Sanitation 7 11-30-2009 05:48 AM
Hurricane burner problem need help! JJDMusic Equipment/Sanitation 11 10-19-2009 07:36 PM
Problem with my fryer's burner Reddy Equipment/Sanitation 16 01-06-2009 07:00 PM
How to download 100k+ PDFs Kaiser HomeBrewTalk Announcements & Feedback 10 01-05-2008 12:00 AM