The Great Bottle Opener Giveaway

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > 3" Dual Tower - which shank will work?

Reply
 
LinkBack Thread Tools
Old 04-09-2011, 11:03 PM   #1
c5_droptop
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2011
Location: Conroe, TX
Posts: 3
Default 3" Dual Tower - which shank will work?

New to MBT but picked up a used kegerator with a lot of spare parts. I have several dual towers as well as single towers and plan on having a commercial keg or two on tap in addition to a home brew or two. So, ideally I would like to run two dual feed towers.

Called Keg Cowboy and got their right angle shanks but there is no room to install two of those in a single tower. Too much conflict with the hard lines making the turn down. Any other source for thee that may be more easily installed?

There are also some pieces-parts that I have, but had concerns with leakage so if I went that route I would need to track down rebuild parts as well.

Any thoughts would be greatly appreciated.

Thanks,
Dave

Here is the stuff that I have:

The situation I am dealing with in the tower:


The pieces parts that I have (several of some, but not enough to really cobble together four taps worth). Plus, the longer assembly in the middle has the same issue and I think that the one in the bottom right is too large). The longer shank in the bottom left is also about the same size as what I bought):

__________________
c5_droptop is offline
 
Reply With Quote Quick reply to this message
Old 04-10-2011, 06:56 PM   #2
carluchi
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2009
Location: Chardon Ohio
Posts: 100
Liked 6 Times on 5 Posts
Likes Given: 1

Default

I use these in my 3", 3 tap tower. They have the measurements, so you should be able to tell if it will fit. Good luck



http://www.micromatic.com/draft-keg-...-4329A-3E.html

__________________
carluchi is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dual Draft Tower, SS with Perlick Faucets DevineBrew Equipment/Sanitation 3 02-11-2011 03:00 PM
Tower Shank Nut Size? Cpt_Kirks Equipment/Sanitation 7 06-20-2010 12:46 PM
Tower Shank Assembly Stuntman Equipment/Sanitation 2 11-14-2009 02:09 AM
dual draft tower THEDIETZ Equipment/Sanitation 6 07-10-2008 08:58 PM
Used dual tower faucet for sale? Guigsy Equipment/Sanitation 12 02-01-2008 02:57 PM